In VHDL

Q6: Design and implement a Morse Code transmitter (limited to only numbers 0 to 9). Operation: Use SW(3:0) to set up the number, and then press key(3) to transmit. The number is shown on HEX5 and the Morse code is transmitted via LEDR(O). If SW(3:0) select a number that is greater than or equal to 10, no Morse code is transmitted. Instead, turn on LEDR(9) to indicate an iror A. Draw a functional block diagram of this design. B. Draw the detailed state diagram or flowchart for the main/control FSM. (state diagram generated by Quartus is not acceptable.) C. Actually realize this design and submit your archived Quartus project (HW3Q5.qar) International Morse Code 1. 2. 3. 4. A dash is equal to three dots. The space between parts of the same letter is equal to one dot. The space between two letters is equal to three dots. The space between two words is equal to seven dots. 3 Q6: Design and implement a Morse Code transmitter (limited to only numbers 0 to 9). Operation: Use SW(3:0) to set up the number, and then press key(3) to transmit. The number is shown on HEX5 and the Morse code is transmitted via LEDR(O). If SW(3:0) select a number that is greater than or equal to 10, no Morse code is transmitted. Instead, turn on LEDR(9) to indicate an iror A. Draw a functional block diagram of this design. B. Draw the detailed state diagram or flowchart for the main/control FSM. (state diagram generated by Quartus is not acceptable.) C. Actually realize this design and submit your archived Quartus project (HW3Q5.qar) International Morse Code 1. 2. 3. 4. A dash is equal to three dots. The space between parts of the same letter is equal to one dot. The space between two letters is equal to three dots. The space between two words is equal to seven dots. 3