Match the numbered step of the fire control group function check with its corresponding description below. Group of answer choices With snap caps in the chamber, set the safety/selector in the "safe" position. 1 Depress the trigger; it will not move. 2 Release the trigger and move to the "fire" position. 3 Depress the trigger again. The hammer/striker will produce an audible "click" 4 Continue to depress the trigger. Manually cycle the action and eject the snap cap. [ Choose ] Release the trigger. An audible reset will be heard but the hammer/striker should not move. [ Choose ] Use a nylon or rubber hammer and tap the receiver or action. [ Choose ] Set the safety and/or selector to the "safe" position; nothing should happen. [ Choose ]