Meena Chavan Corp.'s computer chip production process yields DRAM chips with an average life of 1,800 hours and o = 100 hours. The tolerance upper and lower specification limits are 2,400 hours and 1,600 hours, respectively. Based on the given information, the process capability ratio, Cp (round your response to two decimal places). = The relationship for process capability ratio is: Cp = = Upper Specification Lower Specification 60 = Based on the given information, the process capability ratio, Cp = 1.33 (round your response to two decimal places). A capable process has a Cp of at least 1.0. If the Cp is less than 1.0, the process yields products or services that are outside their allowable tolerance. Based on the process capability ratio (Cp) for the given information, one can say that the process is very much capable of producing the chips to the design specifications. The relationship for process capability index is: - Cok = min Upper specification limit x-Lower specification limit the process capability index (Cpk) = 0.67 (round your response to two decimal places). does not meet the upper and lower control limits indicates that the process variation is centered within I limits. As the Cpk index goes above 1.0, the process becomes increasingly defects. If the Cpk is less than 1.0, the process will not produce within the specified meets is better than ability index (Cpk) for the given information, one can say that the process the specification