Part $1$: Design the Local Area Network

The work milestones for this part of the project are as follows:

The LAN must consist of $2$ switches and $3$ computers.

The two switches must be named S$1$ and S$2.$

The three computers must be named PC$-$A$,$ PC$-$B$,$ and PC$-$C$.$

Part $2$: Create the basic switch configurations

Your network engineering lead has approved the LAN design. Now, the work to implement the

design can begin. Your tasks are as follows:

$2\mathrm{.}1$ Cable the network

Connect PC$-$A to S$1$ on Ethernet Interface $6$

Connect S$1$ to S$2$ on Ethernet Interfaces $1$

Connect PC$-$B to S$2$ on Ethernet Interface $11$

Connect PC$-$C to S$2$ on Ethernet Interface $18$

$2\mathrm{.}2.$ Configure the basic switch functions

Configure the basic functions in both S$1$ and S$2$ as follows:

Set the enable secret to $$class$$

Set the line con $0$ password to $$cisco$$

Set the line vty $015$ password to $$cisco$$

Set the MOTD to $$Unauthorized access is strictly prohibited.$$

Set logging to synchronous