please a detailed solution thanks for the hard work

Figure 1. A schematic representation of different methane reforming processes. Working principle: As shown in Figure 1 (case 2, green line drawing), steam is mixed with natural gas and both should be then pumped into a reactor, in which the reforming reaction occurs. Inside the reformer, synthesis gas will be generated. Then, the as-produced gas will undergo a gas-to-liquid process for methanol generation. Once the final product is obtained, purification is needed for quality assurance before sending the liquid fuel to storage. Some recycling steps are included throughout the process for optimization purposes. Project deliverable 1 (PD1) (10\%): After selecting appropriate data from the literature, perform the energy balance of methane reforming power plant. Furthermore, provide a critique of the energy losses in process and possible ways to save energy. For project delivery, you will be summarizin your data in the form of a report. While performing the energy balance, pay attention to the energy needed for phase cha of liquid water into steam. Moreover, you need to elaborate all additional units that m be needed to reach the final product (methanol). For instance, pumps could be nee condensers and heat exchangers. Rely on the literature to finalize the design of assigned methane reforming process