Please do the router the dhcp part

$\backslash$table$[[0,$FACULTY$],[0,$ADMIN$],[9,$MNGT$],[00,$NATIVE$]]$

sign access ports and trunk ports as needed. For the trunks, use Native VIAN $500.$ reate management SVI's using VLAN $99$ and assign IP addresses from the indicated range. clude configuration for the default$-$gateway.

each switch, configure Spanning Tree for Per$-$VLAN Rapid Spanning Tree. onfigure SW$-1$ to be the Spanning Tree root bridge for VLAN $20$ with a priority of $20480.$

reate a PaGP EtherChannel between SW$-2$ and SW$-3$ using PortChannel $5$ and interfaces $a\frac{0}{7}$&$\frac{0}{8}$

Jse the 'desirable' keyword for the EtherChannel.

Router:

Configure FO$/0$ with sub$-$interfaces for Router$-$on$-$a$-$Stick. FO$/1$ should be the gateway for LAN$-$

$50.$

The first usable IP address should be configured on each sub$-$interface as appropriate. The sub$-$interface number should match the VLAN number as shown on the diagram. Configure a DHCP pool called LAN$-50$ for network $172\mathrm{.}25\mathrm{.}50\mathrm{.}0/24$; exclude $.1$ to $\mathrm{.}15$; use DNS $8\mathrm{.}8\mathrm{.}8\mathrm{.}8$

Testing:

All devices should be able to Ping all other devices $($Workstations$,$ Router, Switches$).$

To be certain all your work is graded properly:

Open the Packet Tracer Activity instructions and select 'Check Results' at the bottom From the next screen, select the 'Connectivity Tests' tab $-$

You want to see the first column 'Status' indicating 'Correct' $-$

Select 'Close' in the bottom$-$right corner.