please solve these two questions as soon fast give me answer

1. (5 points) You have one CSTR and one PFR, each with a volume of 2.5 L. The entering molar flow rate of reactant A is 2 mol/h. Use Figure 1 to graphically calculate the conversion at the exit of each reactor (to two decimal places) if they are configured in series with the CSTR first followed by the PER. Draw the reactor configurations. Show your work for each step in the calculations. All iterations must be shown (if you only show a single guess, you will receive zero credit for this problem). Shade the areas for each type of reactor on the Levenspiel plot provided in Figure 1 (page 2 of this assignment). 2. (5 points) The exothermic reaction AB+C was carried out adiabatically, and the following data were recorded: 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 -A 1.0 1.8 (mol/dm min 4.0 3.0 4.0 3.0 2.0 1.4 1.0 0.7 1.0 0.5 The entering molar flow rate of A was 50 mol/min. Construct a Levenspiel plot in Excel using this data with the FA value included on the y-axis. Connect each point with straight lines. Prepare three copies of this plot and use one to answer each of the following. All quantities need two significant figures. a) What are the PFR and CSTR volumes necessary to achieve 50% conversion? Shade the areas for both reactors on the Levenspiel plot. b) Over what range of conversions would the CSTR and PFR reactor volumes be identical and what would be the volume? Shade the areas for both reactors on the Levenspiel plot. c) What combination of one CSTR and one PFR would minimize the total reactor volume needed to achieve 70% conversion? Shade the areas for both reactors on the Levenspiel plot and determine the volume for each reactor. 1 of 2 Figure 1: Problem 1 Levenspiel Plot 10 9 8 7 6 1/-4 (mol/L/h1 5 1 0 0.1 02 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 XA