Project $7$: Advanced DHCP$,$ Additional Wide Area Networking

Description:

In this project, you will apply previously practiced concepts to your project file. You will add custom subnet scopes to the

DHCP server, reconfigure each PC to use DHCP addressing, reconfigure routers to support DHCP relay services for each

VLAN, and add a third remote site with supporting VLANs, custom subnets, devices, and routing.

Load your Project $4$ packet tracer file, save the file with a new name:

SAVE your Packet Tracer file as follows:

finitial$-$lname$-$section$-$project$-5$

i$.$e$.,$ fflintstone$-$itt$116$TR$100$A$-$project$-5$

Figure $15$ Example Completed Project

Page $21$ of $33$

Project $7-$ Instructions:

Add a DHCP Server Scopes.

Use the custom subnet address plan you created in Project $3$ as a reference.

$$ Create a new DHCP scope $($on the server you created in Project $4)$ for EACH VLAN $/$ Network in the network.

$($Hint: you should have at least $3$ including Wireless.$)$

$$ Be sure to add$/$save each scope with a unique name.

$$ Set the values for the:

$$ Default Gateway

$$ Correct subnet mask

$$ Correct maximum addresses available

$$ Starting host address $($Consider which addresses are $$static$)$

i$.$e$.,$ for a network defined as $172\mathrm{.}31\mathrm{.}10\mathrm{.}62/26$:

Network ID $=172\mathrm{.}31\mathrm{.}10\mathrm{.}62$

Mask $=255\mathrm{.}255\mathrm{.}255\mathrm{.}192$

Gateway $=172\mathrm{.}31\mathrm{.}10\mathrm{.}63$

Starting IP $=172\mathrm{.}31\mathrm{.}10\mathrm{.}64($why$??)$

Limit $60$ users

Configure IP helper services for Main Office for each subnet$/$VLAN$.$

$$ Add the IP helper address $($of the DHCP server$)$ to EACH ethernet network interface on the main$-$office

router

ip helper$-$address