Question 25 (1 point) Consider a manufacturing process depicted by the following flowchart. A1 C1 A2 B C2 Station A has 3 parallel operators, A1, A2, and A3. Station C has 2 parallel operators, C1 and C2. Each unit only needs to be processed by one of the operators A1, A2 and A3. After being processed at Station B, a unit then needs to be processed by either C1 or C2. The process time of the individual operators are given as follows. A1, A2, and A3: 15 minutes B: 15 minutes C1 and C2: 2 minutes. The process initiates the production of a new unit every 22 minutes. What is the utilization of Operator C2 in percentage? Note: Provide a number without the % mark. Round your final answer to 2 decimal places if it is not a whole number. For example, if your answer is 71.723%, enter 71.72 Question 23 (1 point) Station 2 Machine A 15 min/box Station 1 5 min/box Station 3 10 min/box Station 4 10 min/box Station 2 Machine B 15 min/box A process is depicted in the picture. After being processed in the first station, a box needs to be processed at either Machine A or Machine B for the parallel line. The box is then processed at Stations 3 and 4 before leaving the production line. The process time of each station/machine is indicated in the flowchart (e.g., 5 min/box means that the process time is 5 minutes to process each box at the machine/station). What is the process time of this system measured in min/box? Note: 1- Do not include the unit of measure in the answer. For instance, if the answer is 4.6 min/box only enter 4.6. 2- Enter your answer as a decimal number and not a fraction. For instance, if the answer is 1/4 enter 0.25. 3- Round your final answer to 2 decimal places