Question 4:

With reference to Figure 2, R5 and R10 need to support BGP, because they are in different AS. Show the commands that you use to configure BGP on R5 and R10.

R10:

R5:

Now complete the configuration of R5, by configuring OSPF in its Fast Ethernet interface Fa0/0.

Assuming only AS1, how does the routing table of R6 look like. Make sure to add a default route (which is similar to the static route that you defined in the lab).

AS40 0.60.60.1/24 Web Server 60.60.60.2/24 165.13.13.30/28 R10 SO 165.13.13.17/28 192.168.0.18/3 AS1 Private Address Space 192.168.0.0/26 FA S0 NAT box R5 OSPF Area 0 192.1680.17/30 FA0/1 Sw1 192.168.0.14/30 FA0 R4 192.168.0.1 192.168.0.13/30 S0 OSPF Area 24 FA0/0 192.168.0.9/30 6 192.168.0.4/29 192.168.0.10/30 192.168.0.2/29 192.168.0.3/29 AS40 0.60.60.1/24 Web Server 60.60.60.2/24 165.13.13.30/28 R10 SO 165.13.13.17/28 192.168.0.18/3 AS1 Private Address Space 192.168.0.0/26 FA S0 NAT box R5 OSPF Area 0 192.1680.17/30 FA0/1 Sw1 192.168.0.14/30 FA0 R4 192.168.0.1 192.168.0.13/30 S0 OSPF Area 24 FA0/0 192.168.0.9/30 6 192.168.0.4/29 192.168.0.10/30 192.168.0.2/29 192.168.0.3/29