Question: The worktable of a positioning system is driven by a ball screw whose pitch = 8.0 mm. The screw is connected to the output shaft

The worktable of a positioning system is driven by a ball screw whose pitch = 8.0 mm. The screw is connected to the output shaft of a stepper motor through a gearbox whose ratio is 6:1 (six turns of the motor to one turn of the screw). The stepper motor has 32 step angles. The table must move a distance of 450 mm from its present position at a linear velocity = 550 mm/min. Determine (a) how many pulses are required to move the table the specified distance and (b) the required motor speed and pulse rate to achieve the desired table velocity.

Step by Step Solution

There are 3 Steps involved in it

1 Expert Approved Answer

Step: 1 Unlock blur-text-image

Question Has Been Solved by an Expert!

Get step-by-step solutions from verified subject matter experts

Step: 2 Unlock

Step: 3 Unlock

Students Have Also Explored These Related General Management Questions!

1. The worktable of a positioning system is driven by a ball screw whose pitch = 8.0 mm. The screw is connected to the output shaft of a stepper motor through a gearbox whose ratio is 6:1 (six turns...

The worktable of a positioning system is driven by a ball screw whose pitch = 1 0 . 0 mm . The screw is connected to the output shaft of a stepper motor through a gearbox whose ratio is 8 : 1 ( eight...

6.The worktable of a positioning system is driven by a ball screw whose pitch = 10.0 mm. The screw is connected to the output shaft of a stepper motor through a gearbox whose ratio is 8:1 (eight...

1. The worktable of a positioning system is driven by a ball screw whose pitch = 10.0 mm. The screw is connected to the output shaft of a stepper motor through a gearbox whose ratio is 8:1 (eight...

1 . - NC Open - Loop Positioning The worktable of a positioning system is driven by a ball screw whose pitch = 5 . 0 m m . The screw is connected to the output shaft of a stepper motor through a...

The worktable of a positioning system is driven by a ball screw whose pitch-5 mm. The screw is connected to the output of a sperr through a gearbox whose ratio is 2:1. The step angle of a motor is...

One axis of the worktable in a CNC positioning system is driven by a ball screw with a 6 - mm pitch. The screw is powered by a stepper motor which has 1 8 0 step angles using a 2 : 1 gear reduction (...

7.6 (A) One axis of the worktable in a CNC positioning system is driven by a ball screw with a 6-mm pitch. The screw is powered by a stepper motor which has 180 step angles using a 2:1 gear reduction...

An NC worktable is driven by a close loop positioning system consisting of a servomotor, ball screw, and optical encoder. The screw has a pitch = 6 . 0 mm and is coupled to the motor shaft with a...

7.7 One axis of an open-loop positioning system is driven by a stepper motor, which is con- nected to a ball screw with a gear reduction of 3:1 (three turns of the motor for each turn of the screw)....

Q2 From Q1, we know that du(f.g) = sup{f(r) - g(x): I} defines a metric on C(I) where I = [0, 1]. [12 marks] (a) Does this still define a metric if the interval I is changed to 7 = (0, 1)? Explain...

Given 6-, 9-and 18-mH inductor, can they be interconnected to obtain an equivalent 12-mH inductor?

Explain the relevant tax laws and regulations for the client company.

When older adults have difficulty with transportation and communication, or may be reluctant to request needed assistance to which they are entitled, they may be in need of: Group of answer choices...