These two multiple choice please

The cylinder was initially filled with hydraulic fluid with no pressure, all ports were blocked when the cylinder was in the mid-stroke in the horizontal position as shown below, and then a load was applied. The bore is 2 inches, the rod diameter is 1 inch, and the load is w = 1000M what would happen to the piston? (1) It extends completely. (2) It extends slightly and then stops. (3) It retracts completely. (4) It retracts slightly and then stops.. (5) It extends and retracts repeatedly. Rope Pulley There is a cylinder that has leaking piston seals. The cylinder was initially filled with hydraulic fluid with no pressure, all ports were blocked when the cylinder was in the mid-stroke in the vertical position as shown below, and then a load was applied. The bore is 2 diameter is 1 inch, and the load is w 1000 lbf, what would happen to the piston? (1) It drops to the bottom. (2) It stays in the same mid-stroke position regardless of the load. (3) moves down slightly and stays there. (4) It moves up. (5) It moves up and down repeatedly inches, the rod Dp D