Unless otherwise stated, use uA$741$ as an op$-$amp and refer to the terminals in the slide. You don't need to connect OS$1$ and OS$2$ terminals to anything. Press $\text{'}x\text{'}$ and make them NC $($no connection$).$ All resistors must be chosen from $1k$ to $10k$ in integer.

& Plot the input and output signals when you run the simulation.

Add your schematic and the results in the report.

Find $v_i-v_o$ relationships of both circuits and run the simulation in PSPICE. Please follow the procedure and constraints. $(10$pt each$)$

Positive and negative powers are $5$ V and ground, respectively.

Choose the resistors to set the gains of the circuits $($a$)$ and $($b$)$ to $1\mathrm{.}5$ and $-5,$ respectively. One of the resistors must be $1k.$

Apply the sinusoidal input signal with $1-V$ offset, $0\mathrm{.}1-V$ amplitude, and $1-kHz$ frequency for $($a$),$ and the sinusoidal input signal with $2\mathrm{.}5-V$ offset, $0\mathrm{.}2-V$ amplitude, and $1-kHz$ frequency for $($b$).$ The $2\mathrm{.}5-V$ DC should be applied to the positive node of the op$-$amp in $($b$).$

Run PSPICE with the transient simulation for $2$ ms $.$