Write a documented PLC program to implement the process shown. An up-counter must be programmed as...

  

Transcribed Image Text:

Write a documented PLC program to implement the process shown. An up-counter must be programmed as part of a batch-counting operation to sort parts automatically for quality control. The counter is installed to divert 1 part out of every 10 for quality control or inspection purposes. The circuit operates as follows: ➤ A start/stop pushbutton station is used to turn the conveyor motors (M1 and M2) on and off. A proximity sensor counts the parts as they pass by on the conveyor. When 10 is reached, the counter's output activates the gate solenoid, diverting the part to the inspection line. ➤ The gate solenoid is energized for 0.3 second, which allows enough time for the part to continue to the quality control line. The gate returns to its normal position when the 0.3-second time period ends. The counter resets to zero and continues to accumulate counts. ➤ A reset switch is provided to reset the counter manually. Parts conveyer line Proximity switch Quality control line Gate solenoid drive Use the Bottle Line Simulator screen and the following addresses to simulate the program: Stop PB I:1/0 Start PB I:1/1 - Proximity Sensor (NO) _ I:1/6 Reset (NO) I:1/3 (Selector Switch Pos. B) Motor M10:2/0 Motor M2 0:2/2 Gate Solenoid 0:2/5 ΤΟΝ Scanned with CTU C5:1 CamScanner Write a documented PLC program to implement the process shown. An up-counter must be programmed as part of a batch-counting operation to sort parts automatically for quality control. The counter is installed to divert 1 part out of every 10 for quality control or inspection purposes. The circuit operates as follows: ➤ A start/stop pushbutton station is used to turn the conveyor motors (M1 and M2) on and off. A proximity sensor counts the parts as they pass by on the conveyor. When 10 is reached, the counter's output activates the gate solenoid, diverting the part to the inspection line. ➤ The gate solenoid is energized for 0.3 second, which allows enough time for the part to continue to the quality control line. The gate returns to its normal position when the 0.3-second time period ends. The counter resets to zero and continues to accumulate counts. ➤ A reset switch is provided to reset the counter manually. Parts conveyer line Proximity switch Quality control line Gate solenoid drive Use the Bottle Line Simulator screen and the following addresses to simulate the program: Stop PB I:1/0 Start PB I:1/1 - Proximity Sensor (NO) _ I:1/6 Reset (NO) I:1/3 (Selector Switch Pos. B) Motor M10:2/0 Motor M2 0:2/2 Gate Solenoid 0:2/5 ΤΟΝ Scanned with CTU C5:1 CamScanner Write a documented PLC program to implement the process shown. An up-counter must be programmed as part of a batch-counting operation to sort parts automatically for quality control. The counter is installed to divert 1 part out of every 10 for quality control or inspection purposes. The circuit operates as follows: ➤ A start/stop pushbutton station is used to turn the conveyor motors (M1 and M2) on and off. A proximity sensor counts the parts as they pass by on the conveyor. When 10 is reached, the counter's output activates the gate solenoid, diverting the part to the inspection line. ➤ The gate solenoid is energized for 0.3 second, which allows enough time for the part to continue to the quality control line. The gate returns to its normal position when the 0.3-second time period ends. The counter resets to zero and continues to accumulate counts. ➤ A reset switch is provided to reset the counter manually. Parts conveyer line Proximity switch Quality control line Gate solenoid drive Use the Bottle Line Simulator screen and the following addresses to simulate the program: Stop PB I:1/0 Start PB I:1/1 - Proximity Sensor (NO) _ I:1/6 Reset (NO) I:1/3 (Selector Switch Pos. B) Motor M10:2/0 Motor M2 0:2/2 Gate Solenoid 0:2/5 ΤΟΝ Scanned with CTU C5:1 CamScanner Write a documented PLC program to implement the process shown. An up-counter must be programmed as part of a batch-counting operation to sort parts automatically for quality control. The counter is installed to divert 1 part out of every 10 for quality control or inspection purposes. The circuit operates as follows: ➤ A start/stop pushbutton station is used to turn the conveyor motors (M1 and M2) on and off. A proximity sensor counts the parts as they pass by on the conveyor. When 10 is reached, the counter's output activates the gate solenoid, diverting the part to the inspection line. ➤ The gate solenoid is energized for 0.3 second, which allows enough time for the part to continue to the quality control line. The gate returns to its normal position when the 0.3-second time period ends. The counter resets to zero and continues to accumulate counts. ➤ A reset switch is provided to reset the counter manually. Parts conveyer line Proximity switch Quality control line Gate solenoid drive Use the Bottle Line Simulator screen and the following addresses to simulate the program: Stop PB I:1/0 Start PB I:1/1 - Proximity Sensor (NO) _ I:1/6 Reset (NO) I:1/3 (Selector Switch Pos. B) Motor M10:2/0 Motor M2 0:2/2 Gate Solenoid 0:2/5 ΤΟΝ Scanned with CTU C5:1 CamScanner

Answer rating: 100% (QA)

Rung 0000 The start button starts the process and the stop ... View the full answer