using openDDS

HW3: Distributed Energy Resources Simulation in OpenDSS In the IEEE 123 bus example, one PV is added to the middle of feeder before voltage regulator, bus 66. Add the same PV to three other different locations separately, Example case (bus 66), (4 points) Beginning of feeder (bus 149), (4 points) Middle of feeder after voltage regulator (bus 67), (4 points) End of feeder (bus 114). (4 points) Try to change either P or Q or both to maximize the real power output of each PV, while maintaining the circuit voltage profile within limits. Report: 1. At each of four locations, P and Q output of PV, and system voltage profile; 2. Comparisons and conclusions. (4 points) HW3: Distributed Energy Resources Simulation in OpenDSS In the IEEE 123 bus example, one PV is added to the middle of feeder before voltage regulator, bus 66. Add the same PV to three other different locations separately, Example case (bus 66), (4 points) Beginning of feeder (bus 149), (4 points) Middle of feeder after voltage regulator (bus 67), (4 points) End of feeder (bus 114). (4 points) Try to change either P or Q or both to maximize the real power output of each PV, while maintaining the circuit voltage profile within limits. Report: 1. At each of four locations, P and Q output of PV, and system voltage profile; 2. Comparisons and conclusions. (4 points)