The dam for a lake is designed to withstand the additional force caused by silt which has settled on the lake bottom Assuming that silt is equivalent to a liquid of density rho s 1 76 Atilde 103 kg m3 and considering a 1 m wide section of dam, determine the percentage increase in the force acting on the dam face for a silt accumulation of depth 1 5 m Water 6 m Silt

Question: The dam for a lake is designed to withstand the additional force caused by silt which has settled on the lake bottom. Assuming that silt

The dam for a lake is designed to withstand the additional force caused by silt which has settled on the lake bottom. Assuming that silt is equivalent to a liquid of density ρs = 1.76 Ã— 103 kg/m3 and considering a 1-m-wide section of dam, determine the percentage increase in the force acting on the dam face for a silt accumulation of depth 1.5 m.

Water 6 m Silt

Step by Step Solution

★★★★★

3.36 Rating (168 Votes )

There are 3 Steps involved in it

1 Expert Approved Answer

Step: 1 Unlock

Ps I Pw Pw PW Ps I 6m 45m 15m First determine the force on the dam face without the silt ... View full answer

Question Has Been Solved by an Expert!

Get step-by-step solutions from verified subject matter experts

Step: 2 Unlock

Step: 3 Unlock

Document Format (1 attachment)

4-E-M-E-VM (534).docx

120 KBs Word File

Students Have Also Explored These Related Mechanical Engineering Questions!

The base of a dam for a lake is designed to resist up to 120 percent of the horizontal force of the water. After construction, it is found that silt (that is equivalent to a liquid of density Ps =...

The base of a dam for a lake is designed to resist up to 150 percent of the horizontal force of the water. After construction, it is found that silt (which is equivalent to a liquid of density ρs...

A glass tube is designed to withstand a pressure differential of 1.1 atmospheres. In testing, it was found that 12 out of 20 tubes could in fact withstand a pressure differential of 1.5 atmospheres....

The dam for a lake is designed to withstand the additional force caused by silt that has settled on the lake bottom. Assuming that silt is equivalent to a liquid of density ps = 1.76 Ã 103...

The dam for a lake is designed to withstand the additional force caused by silt which has settled on the lake bottom. Assuming that silt is equivalent to a liquid of density s = 1.76 10 3 kg/m 3...

The dam for a lake is designed to withstand the additional force caused by silt that has settled on the lake bottom. Assuming that silt's weight density is s N m 3 and water's weight density is w N m...

The dam on a lake is designed to withstand the additional force produced by the sediment found at the bottom of the lake. Assuming that the density of the sediment is equivalent to that of a liquid...

The base of a dam for a lake is designed to resist up to 150 percent of the horizontal force of the water. After construction, it is found that silt (which is equivalent to a liquid of density =...

Chapter 7: Wastewater Management IN THIS CHAPTER U.S. wastewater regulations Sources of contamination of wastewaters Classification of water pollutants Characteristics of wastewater Wastewater...

Suppose In a Found Ltd. just issued a dividend of $1.43 per share on its common stock. The company paid dividends of $1.05, $1.12, $1.19, and $1.30 per share in the last four years. If the stock...

At January 1, 2022, Blue Corporation had a credit balance of $3.050.000 in its retained earnings account. During the year. Blue paid $275,000 in dividends, reported net income of $420,000 and other...

Firms should repurchase stock under which of the following conditions? More than one annwer may be correct. a . when the stock price is less than intrinsic value b . when adequate funds are avalable...

Use the data in ECONMATH to answer the following questions. (i) Estimate a model explaining colgpa to hsgpa, actmth, and acteng. Report the results in the usual form. Are all explanatory variables...

In an experiment designed to compare two treatments on a three-category response, a researcher expects the conditional distributions to be approximately (0.2, 0.2, 0.6) and (0.3, 0.3, 0.4). a. With ...

Gerry runs a clothing store in London. He recently purchased 1200 dress shirts that had manufacturer's list price of %55 per shirt. On each shirt there was a trade discount of 20% 10% and 5% from the...

How many poles are in the right half-plane, in the left half-plane, and on the j-axis for the open-loop system of Figure P6.1? 2+ 4s 3 4+ 4s + 8s + 20s +15 R(s) C(s) FIGURE P6.1

Ice ages a. cover the entire earth with a sheet of ice b. freeze all the oceans c. occurred seldom in the past d. occurred frequently in the past

In Fig. 25-3, which depicts two closely spaced charged parallel plates in vacuum, let E = 2.0 kV/m and d = 5.0 mm. A proton is shot from plate-B toward plate-A with an initial speed of 100 km/s. What...

A uniform disk of radius r = 250 mm is attached at A to a 650-mm rod AB of negligible mass that can rotate freely in a vertical plane about B. Determine the period of small oscillations (a) If the...

A belt is placed around the rim of a 500-lb flywheel and attached as shown to two springs, each of constant k = 85 lb/in. If end C of the belt is pulled 1.5 in. down and released, the period of...

A square plate of mass m is held by eight springs, each of constant k. Knowing that each spring can act in either tension or compression, determine the frequency of the resulting vibration if (a) The...

If h = 700 mm and d = 500 mm and each spring has a constant k = 600 N/m, determine the mass m for which the period of small oscillations is (a) 0.50 s, (b) Infinite. Neglect the mass of the rod and...

The drive belt on a vintage sander transmits hp to a pulley that has a diameter of d = 4 in. Knowing that the pulley rotates at 1450 rpm, determine the tension difference T 1 T 2 between the tight...

have to turn in in 2 hours please help!! Sovereign Debt Negotiations. A sovereign borrower is considering a $100 million loan for a 4-year maturity. It will be an amortizing loan, meaning that the...