Question: A 240-V rms 60-Hz supply serves a load that is 10 kW (resistive), 15 kVAR (capacitive), and 22 kVAR (inductive). Find: (a) The apparent power

A 240-V rms 60-Hz supply serves a load that is 10 kW (resistive), 15 kVAR (capacitive), and 22 kVAR (inductive). Find:
(a) The apparent power
(b) The current drawn from the supply
(c) The kVAR rating and capacitance required to improve the power factor to 0.96 lagging
(d) The current drawn from the supply under the new power-factor conditions

Step by Step Solution

★★★★★

3.49 Rating (172 Votes )

There are 3 Steps involved in it

1 Expert Approved Answer

Step: 1 Unlock

a S 10 j15 j22 ... View full answer

Question Has Been Solved by an Expert!

Get step-by-step solutions from verified subject matter experts

Step: 2 Unlock

Step: 3 Unlock

Document Format (1 attachment)

905-P-E-M-C (1133).docx

120 KBs Word File

Students Have Also Explored These Related Electricity and Magnetism Questions!

A plant consumes 75 kW at a power factor of 0.70 lagging from a 240-V rms 60 Hz line. Determine the value of the capacitor that when placed in parallel with the load will change the load power factor...

A plant consumes 60 kW at a power factor of 0.5 lagging from a 220-V rms 60-Hz line. Determine the value of the capacitor which when placed in parallel with the load will change the load power factor...

An industrial load consumes 44kW at 0.82 pf lagging from a 240

Figure 2.26 shows three loads connected in parallel across a $1000-\mathrm{V}$ (RMS), 60-Hz single-phase source. Load 1: Inductive load, $125 \mathrm{kVA}, 0.28 \mathrm{PF}$ lagging. Load 2:...

3. three loads connected in parallel across a 1000-V (RMS), 60-Hz Single-phase source. (20 points) Load 1: Inductive load, 125 kVA, 0.28 p.f. lagging Load 2: Capacitive load, 10 kW, 40 KVAR Load 3:...

1. A 240V RMS, 60Hz source is applied to an RL circuit. What would be the amplitude of the applied voltage at time = 4 milliseconds (4x10 sec) after being switched on? Give the answer in RMS voltage...

1611 A load made up of a 200- resistor in parallel with a 150-mH inductor is connected across a 240-V rms, 60-Hz voltage source. Find the complex power delivered to the load and the load power...

A 240-V rms 60-Hz source supplies a parallel combination of a 5-kW heater and a 30- kVA induction motor whose power factor is 0.82. Determine: (a) The system apparent power (b) The system reactive...

A plant consumes 60kW at a power factor of 0.75 lagging from a 240-V rms 60-Hz line. Determine the value of the capacitor that when placed in parallel with the load will change the load power factor...

Electric power is generated by a power plant and transmitted to a distribution station using very high voltage power lines to significantly reduce power line i2R losses. From the distribution...

Discuss the contingency factors that affect planning.

The following account appears in the ledger prior to recognizing the jobs completed in January: Work in Process Balance, January 1 $16,780 Direct materials 136,420 Direct labor 147,160 Factory...

A 1 2 3 1 net gain may be fully treated as ordinary income if the taxpayer has 1 2 3 1 losses from the prior five years.

Use the data file HeadWeight.sav (found on the Student Companion website using the access code card from the front of this text) and run a simple linear regression analysis. Report the findings in...

(a) Two protons in a molecule are separated by 3.80 x 1010 m. Find the electric force exerted by one proton on the other. (b) How does the magnitude of this force compare to the magnitude of the...

Two small silver spheres, each with a mass of 10.0 g, are separated by 1.00 m. Calculate the fraction of the electrons in one sphere that must be transferred to the other in order to produce an...

Three point charges are located at the corners of an equilateral triangle as shown in Figure P23.7. Calculate the resultant electric force on the 7.00-μC charge. 7.00 uC 0.50 m 60 2.00

Define a function named all_larger_than that checks (returns true or false) whether all elements in a given integer array are larger than a given (threshold) integer. For example, if the given array...

1.A manufacturing machine has a 4% defect rate. An inspector chooses 5 items at random. Use the binomial distribution. Round answers to 4 decimal places. a) What is the probability that at least one...

An industry-leading company seeks a qualified candidate for a management position. A management consultancy carries out an assessment centre which concludes in making a positive or negative...