Question: A beam of rectangular cross section supports an inclined load P having its line of action along a diagonal of the cross section (see figure).

A beam of rectangular cross section supports an inclined load P having its line of action along a diagonal of the cross section (see figure). Show that the neutral axis lies along the other diagonal.

7C -b- PK

Step by Step Solution

★★★★★

3.41 Rating (173 Votes )

There are 3 Steps involved in it

1 Expert Approved Answer

Step: 1 Unlock

Load P acts along a diagonal See Figure 615b b a... View full answer

Question Has Been Solved by an Expert!

Get step-by-step solutions from verified subject matter experts

Step: 2 Unlock

Step: 3 Unlock

Document Format (1 attachment)

836-P-M-S (558).docx

120 KBs Word File

Students Have Also Explored These Related Mechanics Questions!

A beam of rectangular cross section (width b and height h) supports a uniformly distributed load along its entire length L. The allowable stresses in bending and shear are allow and allows,...

A wood beam of rectangular cross section (see figure) is simply supported on a span of length L. The longitudinal axis of the beam is horizontal, and the cross section is tilted at an angle a. The...

A cantilever beam built up from two channel shapes, each C 200 x 17.1, and of length L supports an inclined load P at its free end (see figure). Determine the orientation of the neutral axis and...

An overhanging beam ABC with a guided support at A is of rectangular cross section and supports concentrated loads P both at A and at the free end C (see figure). The span length from A to B is L,...

A wood cantilever beam of rectangular cross section and length L supports an inclined load P at its free end (see figure). Determine the orientation of the neutral axis and calculate the maximum...

Strength of Materials HIA ARAMATA UNIVER 14. An extruded aluminum beam has the cross section shown. Knowing that the vertical shear in the beam is 150 kN, determine the shearing stress at: (a) point...

A beam of wide-flange cross section (see figure) has the following dimensions: b = 5 in., t = 0.5 in., h = 12 in., and h1 = 10.5 in. The beam is simply supported with span length L = 10 ft and...

A cantilever beam AB with a rectangular cross section has a longitudinal hole drilled throughout its length (see figure). The beam supports a load P = 600N. The cross section is 25mm wide and 50mm...

A beam of wide-flange cross section (see figure) has the following dimensions: b = 120 mm, t = 10 mm, h = 300 mm, and h1 = 260 mm. The beam is simply supported with span length L = 3.0 m. A...

Question 3 A simply supported A36 steel universal beam is subjected to a 30 kN point load as shown in Figure 3. You are required to: a) Calculate all the internal forces acting at the cross-section...

Budgeting of international operations must address foreign exchange (FX) rates. Variance analysis also must address FX variances. Read the FM magazine article at How does this change the analysis of...

Costs which do not change with the level of output Costs which change with the level of output The change in total costs resulting from an increase in output by one unit Function showing the...

For each of the following situations, which is the explanatory variable and which is the response variable? a. The two variables are whether or not someone smoked and whether or not the person...

12. Solve the following: a. 20!/17! b. 9P3 c. 7C2

A steel bracket of the solid circular cross-section is subjected to two loads, each of which is P = 4.5 kN at D (see figure). Let the dimension variable be b = 240 mm. (a) Find the minimum...

The three beams shown have approximately the same cross-sectional area. Beam 1 is a W14 x 82 with flange plates; beam 2 consists of a web plate with four angles; and beam 3 is constructed of 2 C...

The T-beam shown in the figure has cross-sectional dimensions: b = 210 mm, t= 16 mm, h = 300 mm, and h 1 = 280 mm. The beam is subjected to a shear force V = 68 kN. Determine the maximum shear stress...

Modify your Online Book Order program from week 5 to prompt the users for the number of books they are purchasing. Using a for loop, prompt the user for the cost of each book and store it into a...

Decision tree: The manager for a growing firm is considering the launch of a new product. If the product goes directly to market, there is a 50 percent chance of success. For $120,000, the manager...

A Canada-based investor buys shares of Toronto-Dominion Bank (TD.TO) for C$90.00 on October 15,2007 with the intent of holding them for a year. The dividend rate was C$3.00 per year. The investor...