Question: A cylinder fitted with a piston has an initial volume of 0.1 m3 and contains nitrogen at 100 kPa, 25oC. The piston is moved, compressing

A cylinder fitted with a piston has an initial volume of 0.1 m3 and contains nitrogen at 100 kPa, 25oC. The piston is moved, compressing the nitrogen until the pressure is 1.5 MPa and the temperature is 200oC. During this compression process heat is transferred from nitrogen to the atmosphere at 25oC, and the work done on the nitrogen is 30 kJ. Determine
(a) The amount of this heat transfer.
(b) The entropy generation during the process. Use the PG model for nitrogen.

Step by Step Solution

★★★★★

3.41 Rating (160 Votes )

There are 3 Steps involved in it

1 Expert Approved Answer

Step: 1 Unlock

Given a State1 given State2 given p 2 T 2 The ... View full answer

Question Has Been Solved by an Expert!

Get step-by-step solutions from verified subject matter experts

Step: 2 Unlock

Step: 3 Unlock

Document Format (1 attachment)

861-ME-T (7283).docx

120 KBs Word File

Students Have Also Explored These Related Mechanical Engineering Questions!

A cylinder fitted with a piston restrained by a linear spring contains 1 kg of R-12 at 100C, 800 kPa. The spring constant is 50kN/m, and the piston cross-sectional area is 0.05 m2. A valve on...

A cylinder fitted with a piston restrained by a linear spring contains 2 lbm of R-22 at 220 F, 125 lbf/in 2. The system is shown in Fig. P6.72 where the spring constant is 285lbf/in, and the piston...

A gas is confined to a cylinder fitted with a piston and an electrical heater, as shown here: Suppose that current is supplied to the heater so that 100 J of energy is added. Consider two different...

An insulated cylinder has a piston loaded with a linear spring (spring constant of 600 kN/m) and held by a pin. The cylinder cross-sectional area is 0.2 m2, the initial volume is 0.1 m3, and it...

A cylinder fitted with a piston contains liquid methanol at 20C, 100 kPa and volume 10 L. The piston is moved, compressing the methanol to 20 MPa at constant temperature. Calculate the work required...

A cylinder fitted with a piston contains liquid methanol at 20C, 100 kPa and volume 10 L. The piston is moved, compressing the methanol to 20 MPa at constant temperature. Calculate the work...

A piston cylinder arrangement contains 1 kg of water, shown in Fig. P 5 . 1 6 . The piston is spring loaded and initially rests on some stops. A pressure of 3 0 0 kPa will just float the piston and,...

5-180 Determine the power input for a compressor that compresses helium from 150 kPa and 20C to 400 kPa and 200C. Helium enters this compressor through a 0.1-m2 pipe at a velocity of 15 m/s. 5-181...

ATTEMPT ALL QUESTIONS. BE SURE TO ANSWER A body with mass m = 1 2 kg is attached to the end of a spring that is stretched 2 m by a force of 100 N. Furthermore, there is also attached a dashpot4 that...

A frictionless piston/cylinder is loaded with a linear spring, spring constant 100 kN/m and the piston cross-sectional area is 0.1 m2. The cylinder initial volume of 20 L contains air at 200 kPa and...

What do we call the price that a borrower must pay for debt capital? What is the price of equity capital? What are the four most fundamental factors that affect the cost of money, or the general...

The maximum allowable concentration of H2S(g) in air is 20 mg per kilogram of air (20 ppm by mass). How many grams of FeS would be required to react with hydrochloric acid to produce this...

Exercise 2.28 The following table contains MIPS assembly code for a lock. try: MOV R3,R4 MOV R6,R7 LL R2,0(R2) LL R5,0(R1) SC R3,0(R1) SC R6,0(R1) BEQZ R3,try MOV R4,R2 MOV R7,R5 2.28.1 [5] ...

Everett, Price, Bedell, and Telljohann (1997) mailed a survey to a random sample of physicians. Half were offered $1 if they would return the questionnaire (this was the experimental group); the...

Air at sonic conditions and at static temperature and pressure of 340 K and 250 kPa, respectively, is to be accelerated to a Mach number of 1.6 by cooling it as it flows through a channel with...

Air is cooled as it flows through a 20-cm-diameter duct. The inlet conditions are Ma1 = 1.2, T01 = 350 K, and P01 = 240 kPa and the exit Mach number is Ma2 = 2.0. Disregarding frictional effects,...

Saturated steam enters a converging-diverging nozzle at 1.75 MPa, 10 percent moisture, and negligible velocity, and it exits at 1.2 MPa. For a nozzle exit area of 25 cm2, determine the throat area,...

An insurance company is offering a new policy to its customers. Typically, the policy is bought by a parent or grandparent for a child at the childs birth. The details of the policy are as follows:...

Which of the following statements is CORRECT? Richard Roll has argued that it is possible to test the CAPM to see if it is correct. Tests have shown that the risk/return relationship appears to be...

Jess, Kia, and Len form a partnership to design and test energy storage facilities and equipment. The liability of all partners is limited to the amount of their investments in the firm. This entity...