Question: A gray silty clay (CL) is sampled from a depth of 12.5 feet. The moist soil was extruded from a 6-inch-high brass liner with an

A gray silty clay (CL) is sampled from a depth of 12.5 feet. The "moist" soil was extruded from a 6-inch-high brass liner with an inside diameter of 2.83 inches and weighed 777 grams.

(a) Calculate the wet density in pounds per cubic feet.

(b) A small chunk of the original sample had a wet weight of 140.9 grams and weighed 85.2 grams after drying. Compute the water content, using the correct number of significant figures.

Step by Step Solution

★★★★★

3.29 Rating (152 Votes )

There are 3 Steps involved in it

1 Expert Approved Answer

Step: 1 Unlock

a V t 283 2 4 6 37741 in 3 b M w M t M s 1409 852 557 ... View full answer

Question Has Been Solved by an Expert!

Get step-by-step solutions from verified subject matter experts

Step: 2 Unlock

Step: 3 Unlock

Document Format (1 attachment)

1430-P-M-F-M(1827).docx

120 KBs Word File

Students Have Also Explored These Related Mechanics Questions!

Soil borings made at a site near Chicago indicate that the top 6 m is a loose sand and miscellaneous fill, with the groundwater table at 3 m below the ground surface. Below this is a fairly soft...

The medium gray silty clay of Fig. 8.23(b) at a depth of 20 m had an LL of 38 and a PL of 23. Estimate the following parameters for this soil: (a) Coefficient of earth pressure at rest; (b) Effective...

The mass of a sample of silty clay soil plus container is 18.43 g and the weight of the dry soil plus container is 13.67 g. The container weighs 8.84 g. Compute the water content of the sample.?

) A gray silty clay is sampled from a depth of 1 2 . 5 ft . The moist soil was extruded from a 6 - in high brass liner with an inside diameter of 7 . 1 8 cm and weighed 8 2 3 g . ( Problem 2 . 1 6 )...

SHOW ALL WORK!!! A brown silty sand fill 5 m thick with total unit weight of 1 9 . 6 k N m 3 was instantaneously placed over a 1 5 m thick layer of compressible gray silty clay. Underlying the clay...

Problem 2 : A 5 m thick brown silty sand fill layer with a total unit weight = 1 9 . 6 2 k N m 3 ( use the same unit weight above and below water table for this soil ) was placed over a 1 5 m thick...

Undisturbed piston samples of grey silty Chicago clay were obtained from a depth of -9 m as shown in the soil profile in Fig. P13.70a, for laboratory testing. Different types of strength tests as...

A soft clay deposit at a site is 5 0 ft deep and is underlain by weathered shale. The water table was located at an average depth of 6 ft and does not vary much annually. The soft clay was classified...

Soil Mechanics: Clayey soil with high plasticity index is most likely classified as: a ) Sand ( SM ) b ) Silty Clay ( CL ) c ) Well - graded Gravel ( GW ) d ) High plasticity Clay ( CH ) ? ? ? ?

Problem 4 General Remarks This example problem illustrates the manner in which the quantities used to describe the phase relations are computed; it involves both densities and unit weights. Problem...

Assume that h: R2 R3 is determined by this action. Using the standard bases, find (a) The matrix representing this map; (b) A general formula for h(). 0 0

C) A financial record containing information about profitability for the last year went missing from the Finance Department at the headquarters of Jawwal Co. Jawwal is seeking your help to retrieve...

1 7 . 4 Using the information in the Financial Statements If reporting a net loss, a company is always unable to get a new loan from a bank. is always unable to make payroll. is always unable to pay...

Frank is lending $1,000 to Sarah for two years. Frank and Sarah agree that Frank should earn a 2 percent real return per year. (LO5) a. The CPI (times 100) is 100 at the time that Frank makes the...

If 1 cup of cream having a density of 1005 kg/m 3 is turned into 3 cups of whipped cream, determine the specific gravity and specific weight of the whipped cream.

The density of nitrogen contained in a tank is 1.5 kg/m 3 when the temperature is 25C. Determine the gage pressure of the gas if the atmospheric pressure is 97kPa.

The temperature and pressure at the surface of mars during a Martian spring day where determined to be -50C and 900 pa, respectively. (a) Determine the density of the Martian atmosphere for these...

ces Suppose a stock had an initial price of $68 per share, paid a dividend of $2.00 per share during the year, and had an ending share price of $57. Compute the percentage total return, dividend...

Brooke, a single taxpayer, works for Company A for all of 2021, earning a salary of $70,000. (Round your intermediate and final answers to the nearest whole dollar amount.) a. What is her FICA tax...

Question 29 of 75. Which of the following is an advantage of selling property using the installment sale method? Spreading the gain over the years of payment may help lower the taxpayer's capital...