Question: A material containing cracks of initial length 0.010 mm is subjected to alternating tensile stresses of 25 and 125 MPa for 350,000 cycles. The material

A material containing cracks of initial length 0.010 mm is subjected to alternating tensile stresses of 25 and 125 MPa for 350,000 cycles. The material is then subjected to alternating tensile and compressive stresses of 250 MPa. How many of the larger stress amplitude cycles can be sustained before failure? The material has a fracture toughness of 25 MPa(m and materials constants of n = 3.1 and C = 1.8 × 10-10 for these units. Assume f = 1.0 for all cracks?

Step by Step Solution

★★★★★

3.44 Rating (176 Votes )

There are 3 Steps involved in it

1 Expert Approved Answer

Step: 1 Unlock

The critical flaw size that will lead to failure under a stress of 250 MPa can be determined from th... View full answer

Question Has Been Solved by an Expert!

Get step-by-step solutions from verified subject matter experts

Step: 2 Unlock

Step: 3 Unlock

Document Format (1 attachment)

814-P-M-S (1221).docx

120 KBs Word File

Students Have Also Explored These Related Mechanics Questions!

A material of unknown composition with an initial length of 2.0 m is found to expand by 0.33 mm when it is heated by 15 K. What is the coefficient of thermal expansion of this material?

Show that for a monatomic model solid the Young modulus E is given approximately by E = 1/r0(d2U/dr2)x = x0 where U is the interaction potential energy of a pair of atoms distance r apart and r0 is...

a material containing cracks of initial length of 0 . 0 1 2 mm is subjected to alternating tensile stresses of 2 5 and 1 2 5 MPa for 3 9 0 0 0 0 cycles the material is then subjected to alterating...

Stat 235, ASAP please. 17 Quiz The first historically documented engineer, Imhotep, created a new type of building with a step pyramid, named for its series of flat- terraced platforms....

1. Which of the following statements is incorrect for grain boundary energy? a) The increase in the dislocation density in the structure of the materials has no effect on the grain boundary energy....

2. Classify each of the following as a compound or a mixture. If it is impossible to tell, explain why. a. a solid combination of iron and oxygen, no part of which is attracted to a magnet b. a...

1. Wet solids containing 70% water is mixed with recycled dry solid to reduce the water content to 50% before being admitted into the granulator. The solid leaving the granulator is fed to a drier...

Hydrogen is a small atom. Hydrogen can cause major problems in various materials. It can migrate inside the material and at the phase boundaries or microcracks hydrogen gas is formed at high...

A radioisotope of a chemical element is an unstable atom that contains an unusual number of neutrons or protons. Radioisotopes can be natural or artificially created by bombarding particular elements...

For each of the following categorical statements, identify: (a) the letter label (A, E, I, O) for the statement, (b) the quantity, (c) the quality, (d) the subject and predicate terms, and (e) which...

Consider a real-time system with two voice calls of periodicity 5 msec each with CPU time per call of 1 msec, and one video stream of periodicity 33 ms with CPU time per call of 11 msec. Is this...

What are examples of long-term goals?

2 Elaborate on your answer to the previous question by using demand curves. For which good does demand change and for which good does the quantity demanded change?

Design a method by which glass beads (having a density of 2.3 g/cm 3 ) can be uniformly mixed and distributed in a Cu-20% Ni alloy (density of 8.91 g/cm 3 ).

Suppose that MgO contains 5 mol% NiO. Design a solidification purification method that will reduce the NiO to less than 1 mol% in the MgO.

Gibbs Phase Rule. Write a computer program that will automate the Gibbs phase rule calculation. The program should ask the user for information on whether the pressure and temperature or only the...

Which of the following statement regarding high-frequency trading (HET) are true? The HFT industry is becoming less probable due to increased competition O HIT Gore marity The HF industry is becoming...

how do you do 15 X 2 P(X =x) 0.2 0.1 0.3 k a Find the value of k. b Find P(X > 3). c Find E(X). 14 A probability distribution of Y is given in the table. y 1 3 6 10 P(Y =y) 0.1 0.3 k 2k a Find the...

You want to buy a new car, but you can make an initial payment of only $2,400 and can afford monthly payments of at most $500. A) If the APR on auto loans is 12% and you finance the purchase over 48...