A steel spur pinion has a diametral pitch of 10 teeth/in, 18 teeth cut full-depth with a

Question:

A steel spur pinion has a diametral pitch of 10 teeth/in, 18 teeth cut full-depth with a 20◦ pressure angle, and a face width of 1 in. This pinion is expected to transmit 2 hp at a speed of 600 rev/min.

Determine the bending stress.

Fantastic news! We've Found the answer you've been seeking!

Step by Step Answer:

Related Book For book-img-for-question

Shigleys Mechanical Engineering Design

ISBN: 978-1121345317

9th edition

Authors: Richard G. Budynas, J. Keith Nisbett

See More Books

Question Posted: May 30, 2013 08:00 AM

See More Questions

A steel spur pinion has a diametral pitch of 12 teeth/in, 16 teeth cut full-depth with a 20 pressure angle, and a face width of in. This pinion is expected to transmit 1.5 hp at a speed of 700...
A 20 full-depth steel spur pinion has a diametral pitch of 5 teeth/in and 24 teeth and transmits 6 hp at a speed of 50 rev/min. Find an appropriate face width if the allowable bending stress is 20...
A 17-tooth spur pinion has a diametral pitch of 8 teeth/in, runs at 1120 rev/min, and drives a gear at a speed of 544 rev/min. Find the number of teeth on the gear and the theoretical...
Alpha Appliance Service had net income for the year of $ 35,000. In addition, the balance sheet reports the following balances: Calculate the return on assets (ROA) for Alpha Appliance Service for...
Determine the equivalent Leq in the circuit of Fig. 13.81. 4 H 2 H 10 H 6 H S H
Safrole, a substance isolated from oil of sassafras, is used as a perfumery agent. Propose a synthesis of safrole from catechol (1,2-benzenediol). CH2CH=CH2 Safrole
How are NDIs procured?
Rocky Mountain Tire Center sells 20,000 go-cart tires per year. The ordering cost for each order is $40, and the holding cost is 20% of the purchase price of the tires per year. The purchase price is...
F-25 Let P3 have the inner product given by evaluation at -7, -1, 1, and 7. Let po (t) = 2, p (t) = 4t, and q(t) = 24 Notice that these polynomials form an orthogonal set with this inner product....
1. Discuss the nature of the market structure and demand for Cisco's products. 2. Given the industries in which Cisco competes, what are the implications for the major types of buying situations? 3....
A 2-tooth left-hand worm transmits ¾ hp at 600 rev/min to a 36-tooth gear having a transverse diametral pitch of 8 teeth/in. The worm has a normal pressure angle of 20¦, a pitch...
A steel spur pinion has 16 teeth cut on the 20 full-depth system with a module of 8 mm and a face width of 90 mm. The pinion rotates at 150 rev/min and transmits 6 kW to the mating steel gear. What...
Solve Prob. F711 using the conjugate-beam method. Data from Prob. F711 Use the moment-area theorems and determine the slope at A and displacement at C. EI is constant. A 5 kN.m -1.5 m- C -1.5 m-...
Using an appropriate example, explain the difference between private and social costs, and private and social benefits.
Using examples, explain three sources of market failure.
Do you think the Internet is a public good? Why or why not?
In a market economy, information about the quality or function of goods and services is a valuable good in its own right. How does the private market provide this information? Can you think of any...
Why is there litter along most major roads but rarely in peoples gardens?
Let What is the fastest way to show that uvxyvu (x, y, u, v) = 0 for all (x, y, u, v)? f(x, y, u, v) = x + ev 3y + In(2 + u)
[a] Two foam blocks, each with a charge of 19 micro coulombs (1 C = 10-6 C), are both held in place 19 cm apart in the east-west direction. A foam ball with a charge 49 C is placed 55 cm north of the...
Anke Perks is opening an arts and crafts store that focuses on canvases, paints, and pencils. Each canvas is sold for $24. The variable operating costs are $14 per canvas while the fixed operating...
Determine the deflection equation for the steel beam shown using singularity functions. Since the beam is symmetric, write the equation for only half the beam and use the slope at the beam center as...
Determine the deflection equation for the cantilever beam shown using singularity functions. Evaluate the deflections at B and C and compare your results with Example 411. 1/2 /2
Given the network shown, find the possible range of values for the current and power dissipated by the following resistors: a) 390 ohms with a tolerance of 1%. b) 560 ohms with a tolerance of 2%. 10 V
Elaborate on "The Value of Learning of Applied Research Methods in Sports Management or Kinesiology" as another section of your Applied Research Methods in Sports Management. source:...
1. A entered into a contract with B, who is a minor. Can A later asks for the invalidation of the contract by reason of the minority of B? 10 points 2. A, the seller, and B, the buyer, agreed for the...
Prepare journal entries to record transactions a through h. a. Raw materials purchased on credit, $108,000. b. Direct materials used, $44,000. Indirect materials used, $19,800. c. Direct labor used,...

A steel spur pinion has a diametral pitch of 10 teeth/in, 18 teeth cut full-depth with a

Question:

Step by Step Answer:

N P Y0309 d V Ko Table 142 Eq 1334 Eq 144b ...View the full answer

Shigleys Mechanical Engineering Design

Students also viewed these Mechanical Engineering questions