Question: An overflow spillway is designed to discharge 214 m3/sec under a maximum head of 1.86 m. Determine the width and the profile of the spillway

An overflow spillway is designed to discharge 214 m3/sec under a maximum head of 1.86 m. Determine the width and the profile of the spillway crest if the upstream and downstream slopes are 1:1. Assume C = 2.22.

Step by Step Solution

★★★★★

3.30 Rating (159 Votes )

There are 3 Steps involved in it

1 Expert Approved Answer

Step: 1 Unlock

Eqn 89 L QCH s 32 214222186 32 380 m Fig 812 aH s 0 a 00 ... View full answer

Question Has Been Solved by an Expert!

Get step-by-step solutions from verified subject matter experts

Step: 2 Unlock

Step: 3 Unlock

Document Format (1 attachment)

884-P-M-F-M (982).docx

120 KBs Word File

Students Have Also Explored These Related Mechanics Questions!

A siphon spillway is designed to discharge 20 m3/sec with a head above the crest of hs, a crest elevation of 30 m, and an outlet elevation of 0 m. The allowable gauge pressure at the crest -8 m of...

An overflow spillway with a 300-m crest is designed to discharge 3,600 m3/sec. A 1:20 model of a portion of the cross section of the dam is built in a laboratory flume 1 m wide. Calculate the...

A 31. 2-ft-wide overflow spillway is subject to a head of 3. 25 feet under design conditions. The coefficient of discharge is 3.42 based on model studies. (a) Determine the spillway discharge,...

An overflow spillway is designed to discharge 2 1 4 m 3 / s under a maximum head of 1 . 8 6 m . Determine the width and the profile of the spillway crest if the upstream and downstream slopes are 1 :...

Determine the discharge on an overflow spillway designed for a maximum head of 8 ft above the crest. The overflow section is 1 2 ft high and 1 0 0 ft long. The tailwater can rise 6 . 5 ft above the...

{ Hydraulic Engineering: Please show all work for deriving coefficients and necessary terms! The correct answer is provided to check against. Please do not report incorrect answer, but adjust your...

1 3 . 4 4 Determine the discharge on an overflow spillway designed for a maximum head of 8 ft above the crest. The overflow section is 1 2 ft high and 1 0 0 ft long. The tailwater can rise 6 . 5 ft...

The 120-m-long crest of an overflow spillway will discharge 1,200 m3/sec of floodwater from a reservoir with a permitted maximum head of 2.75 m. The operation of the prototype spillway is studied on...

An overflow spillway with a 100-m-long crest will convey a design discharge of 1,150 m3/sec under a permitted maximum head of 3.00 m. The operation of the prototype spillway is studied on a 1:50...

1 3 . 4 4 Determine the discharge on an overflow spillway designed for a max head of 8 ft avove the crest. the overflow section is 1 2 ft high nad 1 0 0 ft long. The tailwater can rise 6 . 5 ft above...

I have recently been employed by HMS Nautical Inc to work on their submarine program. I have only some basic data to work with and no idea how to use it to get the information I need. Here is what I...

a. If a man tests negative, what is the probability that he actually has the disease? b. For many medical tests, it is standard procedure to repeat the test when a positive signal is given. If...

20. Gasoline Prices. Suppose that the average price for a liter of gasoline in the United States is $0.99 and in Russia is $0.90. Assume these averages are the population means in the two countries...

3. Using market supply and demand analysis, explain why labor union leaders are strong advocates of raising the minimum wage above the equilibrium wage.

A falling-head permeability test on a specimen of fine sand 12.5 cm2 in area and 10 cm long gave a k of 6.2 x 10-4 cm/s. The dry mass of the sand specimen was 195 g and s was 2.71 Mg/m3. The test...

The compression curve for a certain clay is a straight line on the semilogarithmic plot, and it passes through the point e = 1.15, ' v = 65 kPa and e = 0.76, ' v = 825 kPa. Determine an equation for...

The following consolidation test data were obtained from undisturbed San Francisco Bay Mud. For this clay, LL = 88, PL = 43, s = 2.70 Mg/m3 and w = 105.7%. Initially, the specimen height was 2.54 cm...

Can you provide the following information relative to the Boeing Company: 1. Has the company's current ratio been declining or increasing over the past five years? Why or why not? 2. Compared to the...

You are evaluating a project for The Farstroke golf club, guaranteed to correct that nasty slice. You estimate the sales price of The Farstroke to be $420 per unit and sales volume to be 1,200 units...

Q2 30 Marta 2(a) TableQ2(a) shows and empty financial forecast template. Create a 20 complete 4 year (YO,Y1, 42,Y3) financial forecast for your entrepreneurship venture with a product/service that...