A flowchart of a methanol synthesis process is shown below.

A. Fresh feed?a mixture of CO. H₂, N₂, and CO₂

B. Feed to the reactor?30.O mole% CO, 63.0% H₂, 2.0% N₂, and 5.0% CO₂.

Reactor Two reactions occur and proceed to equilibrium at 200?C and 4925 kPa absolute: The following specifications apply to the labeled streams and process units:

C. Reactor effluent?contains all teed and product species at the reactor temperature and pressure. Species partial pressures satisfy the two given equations.

Sep 1. Condenses all methanol and water in reactor effluent

D. Liquid methanol and water. (These species will be separated by distillation in a unit not shown.)

E. Gas containing N₂ and un-reacted CO. H₂, and CO₂.

Sep2. Multiple-unit separation process

F. All of the nitrogen and some of the hydrogen in Stream E.

G. Recycle stream?CO, CO₂ and 10% of the hydrogen fed to Sep2.

(a) Taking 100kmol/h of Stream B as a basis of calculation, calculate the molar flow rates (k mol/h) and molar compositions of the remaining six labeled streams.

(b) The process is to be used to provide 237 k mol/h of methanol. Scale up the flowchart of part (a) to calculate the required fresh feed rate (SCMH), the flow rate of the reactor effluent (SCMH), and the actual volumetric flow rate of the reactor effluent (m³/h), assuming ideal gas behavior.

(c) Use the rule of thumb for a diatomic gas given on p. 192 to test the ideal gas assumption at the reactor outlet. If the assumption is invalid, which of the values calculated in part (b) are in error?

A B REACTOR CO + 2H CHOH(M), C CO + 3H CH3OH + HO SEP1 D (Kp) (Kp)2 = = E PM PPH PMPHO p PH SEP2 -2 = 3.49 x 106 kPa 2 = 5.19 x 108 kPa-