Question: For the bar fixed at both ends and subjected to the uniformly distributed loading shown in Figure P3-56, determine the displacement at the middle of

For the bar fixed at both ends and subjected to the uniformly distributed loading shown in Figure P3-56, determine the displacement at the middle of the bar and the stress in the bar. Let A = 2 in2 and E = 30 Ã— 106 psi.

Figure P3-56

T, 100 lb/in. %3D . -30 in.- 30 in.

Step by Step Solution

★★★★★

3.51 Rating (171 Votes )

There are 3 Steps involved in it

1 Expert Approved Answer

Step: 1 Unlock

Global equations Solving Equation 2 2 10 6 2 u 2 3000 u ... View full answer

Question Has Been Solved by an Expert!

Get step-by-step solutions from verified subject matter experts

Step: 2 Unlock

Step: 3 Unlock

Document Format (1 attachment)

1414-P-T-H-T(1320).docx

120 KBs Word File

Students Have Also Explored These Related Thermodynamics Questions!

A string fixed at both ends and having a mass of 4.80 g, a length of 2.00 m, and a tension of 48.0 N vibrates in its second (n = 2) normal mode. What is the wavelength in air of the sound emitted by...

A string is fixed at both ends and is vibrating at 130 Hz, which is its third harmonic frequency. The linear density of the string is 5.6 10-3 kg/m, and it is under a tension of 3.3 N. Determine the...

A string of mass m is fixed at both ends. The fundamental tone oscillations are excited with circular frequency w and maximum displacement amplitude a max. Find: (a) The maximum kinetic energy of the...

Test II CE 3 3 2 Structural Analysis 1 - For the beam shown in Figure P - 1 / 3 , calculate reactions and draw shear and moment diagrams. What is the maximum shear and moment? A is a pin, B & D are...

13. A steel bar ABCD of varying cross-section is subjected to the axial forces as shown in Fig. Find the value of P for equilibrium. If the modulus of elasticity E=2.1105N/mm2. deternine the...

The beam shown in the figure below is a wide - flange W 1 6 x 3 1 with a cross - sectional area of 9 . 1 2 in 2 and a depth of 1 5 . 8 8 in . The second moment of inertia is 3 7 5 in 4 . The beam is...

A part of a structural system is as shown in the figure below. It consists of a main beam ABCD, pin supported at A and roller supported at C . An extended beam D E is connected to the main beam at D...

For the one-dimensional steel bar fixed at each end and subjected to a uniform temperature drop of T = 30°C as shown in Figure P15 -2, determine the reactions at the fixed ends and the stress in...

A CASE STUDY OF TUNNEL INSTABILITY IN WEAKNESS ZONE CONTAINING SWELLING CLAY Dawei Mao1,2 Bjrn Nilsen Shurong Feng ? Haibin Zhao 2 Ming Lu14 1 Nanyang Technological University, Singapore PowerChina...

Q1 A simply supported beam has a concentrated downward force P at a distance of a from the left support, as shown in the figure below. The flexural rigidity EI is constant. Find the equation of the...

A sample of gas at 40 C occupies a volume of 2.32 L. If the temperature is increased to 75 C. What will the volume be, assuming the pressure remains constant?

You are the audit manager of Michael & Gabriel CPA Limited and are currently carrying out the audit of Eason Limited (Eason) for the year ended 30 September 2020. Eason is a company incorporated...

able 6 . 3 Depreciation under Modified Accelerated Cost Recovery System ( MACRS ) Depreciation is expressed as a percentage of the asset's initial cost. These schedules are actually carries over six...

6.62 Unknown to a quality-control inspector, 20% of a very large shipment of electric switches are defective. The inspector has been told to reject the shipment if, in a sample of 15 switches, 2 or...

A piston of mass 2 kg is lowered 0.5 m in the standard gravitational field. Find the required force and work involved in the process.

An escalator raises a 100 kg bucket of sand 10 m in 1 minute. Determine the total amount of work done during the process.

A bulldozer pushes 500 kg of dirt 100 m with a force of 1500 N. It then lifts the dirt 3 m up to put it in a dump truck. How much work did it do in each situation?

2. Calculate the future value of a savings account of $10,000 for 6 years at 9.25% compound interest. 4. When Brook was born, his parents put down a deposit for him in an investment account earning...

Current yield, capital gains yield, and yield to maturity Hooper Printing Inc. has bonds outstanding with 9 years left to maturity. The bonds have an 9% annual coupon rate and were issued 1 year ago...

PLS HURRY An investment project has annual cash inflows of $7,000,$6,700,$7,500, and $8,800, and a discount rate of 14%. What is the discounted payback period for these cash flows if the initial cost...