For the problem specified in the table, build upon the results of the original problem to obtain

Question:

For the problem specified in the table, build upon the results of the original problem to obtain a Basic Load Rating for a ball bearing at C with a 95 percent reliability. The shaft rotates at 1200 rev/min, and the desired bearing life is 15 kh. Use an application factor of 1.2.
Problem 3-71, A countershaft carrying two V-belt pulleys is shown in the figure. Pulley A receives power from a motor through a belt with the belt tensions shown. The power is transmitted through the shaft and delivered to the belt on pulley B. Assume the belt tension on the loose side at B is 15 percent of the tension on the tight side.
(a) Determine the tensions in the belt on pulley B, assuming the shaft is running at a constant speed.
(b) Find the magnitudes of the bearing reaction forces, assuming the bearings act as simple supports.
(c) Draw shear-force and bending-moment diagrams for the shaft. If needed, make one set for the horizontal plane and another set for the vertical plane.
(d) At the point of maximum bending moment, determine the bending stress and the torsional shear stress.

For the problem specified in the table, build upon the 178161

(e) At the point of maximum bending moment, determine the principal stresses and the maximum shearstress.

Fantastic news! We've located the answer you've been seeking!

Step by Step Answer:

Related Book For  answer-question

Shigleys Mechanical Engineering Design

ISBN: 978-1121345317

9th edition

Authors: Richard G. Budynas, J. Keith Nisbett

Question Posted: