Question: 3. Lay out a cam profile using a cycloidal follower displacement (both rise and return) if the cam is to dwell at zero lift for

3. Lay out a cam profile using a cycloidal follower displacement (both rise and return) if the cam is to dwell at zero lift for the first 100" of the motion cycle and to dwell at 1.5 inches lift for cam angles from 160" to 220". The follower returns to zero from 220" to 360". The cam is to have a translating, radial, roller follower with a roller diameter for 1.0 in. The cam will rotate clockwise and the base circle diameter is 2 in. Lay out the cam profile using 20' plotting intervals. Please use Solidworks to design the profile. Submit a screenshot of the final profile

Step by Step Solution

There are 3 Steps involved in it

1 Expert Approved Answer

Step: 1 Unlock blur-text-image

Question Has Been Solved by an Expert!

Get step-by-step solutions from verified subject matter experts

Step: 2 Unlock

Step: 3 Unlock

Students Have Also Explored These Related Mathematics Questions!

Please solve in details and submit solidworks screenshot Image transcription text 3. Lay out a cam profile using a cycloidal follower displacement (both rise and return) if the cam is to dwell at...

Layout a cam profile using a harmonic follower displacement ( both rise and return ) . Assume that the cam is to dwell at zero lift for the first 1 0 0 of the motion cycle and to dwell at a 2 . 5 cm...

Homework # 3 : Cam - follower mechanisms Design Preliminary If the uniform motion s ( ) = L ( ) , 0 is to be used for the rise, the follower displacement shown in the figure can be defined by 0 u r c...

A plate cam with a radial reciprocating roller follower is to be designed using the input, the rise and fall, and the output motion shown in Table P6.28. The base circle diameter is 3 in and the...

6 ) Consider a cam - follower mechanism with a translating flat - face follower. The cam rotates \ ( 1 8 0 ^ { \ circ } \ ) during the rise period of the follower followed by a dwell for \ ( 3 0 ^ {...

Pro my A plate cam with a zero offset to a knife- edged follower is to be designed using the input, the rise and fall, and the output Displacement information Cam Angle Rise or Fall (0, deg) (L, mm)...

Problem 9 A plate cam with a zero offset to a knife- edged follower is to be designed using the input, the rise and Displacement information Cam Angle Rise or Fall (0, deg) Follower Motion (L, mm)...

A plate cam with a zero offset to a knife- edged follower is to be designed using the input, the rise and fall, and the output Displacement information Cam Angle Rise or Fall (0, deg) (L, mm)...

I have a homework question I need help with: We have a constant-velocity cam rotates with angular velocity of 100 RPM. The cam is to have translating roller follower with a half inch roller diameter....

Question 4 (CLO6: %100) [20 marks] A cam is to be designed. Using the following motion equations, construct a chart that tabulates follower displacement versus time and cam rotation. Use 0.5 seconds...

Consider the separation by distillation of a chlorination effluent to recover C2H5Cl. The feed is a bubble-point liquid at the column pressure of 240 psia with the following composition and K-values...

What is the breakeven analysis and current ratio from the information in the table? EXHIBIT C14.2 Comparative Statements of Income and Expenses for the Most Recent Years Ended June 30 INCOME Contract...

Problem 2 A The Central Division of Miller's Quarter Horse Company has sales of \ ( \ $ 4 , 5 0 0 , 0 0 0 \ ) . It also has invested assets of \ ( \ $ 2 , 5 0 0 , 0 0 0 \ ) and operating expenses of...

2023 1040 form 1.Phillip and Claire are married and file a joint return. Phillip is self-employed as a real estate agent, and Claire is a flight attendant. Phillip and Claire have three dependent...