$\backslash (5(25\backslash \%)\backslash )$ A tension member in a machine is filleted as shown. The member has a manufacturing defect that causes the fluctuating tension load to be applied eccentrically resulting in a fluctuating bending stress as well. I have done all of the stress calculations for you including the stress concentration, and the resulting mean Von Mises stress is $65\mathrm{.}1$ MPa and the resulting Von Mises alternating stress is $25\mathrm{.}1$ MPa $.$ The member is machined, and its dimensions are $\backslash (\backslash$mathrm$\{$D$\}=33\backslash$mathrm$\{$~mm$\},\backslash$mathrm$\{$~d$\}=25\backslash$mathrm$\{$~mm$\},\backslash$mathrm$\{$~h$\}=3\backslash$mathrm$\{$~mm$\}\backslash )$ and $\backslash (\backslash$mathrm$\{$r$\}=3\backslash$mathrm$\{$~mm$\}\backslash ).$ The material has an ultimate strength $\backslash (\backslash$mathrm$\{$Sut$\}^\{2\}=380\backslash$mathrm$\{$MPa$\}\backslash ).$ Determine the infinte$-$life fatigue safety factor for the member for $\backslash (90\backslash \%\backslash )$ reliability. Draw the Modified Goodman diagram and show the stress state. Label everything.