Add the items into their columns specified for each one.

The bottle with cocoa will come down the line. 10 bottles are filled at a time. The operator will press a start button to start the process. Hot milk is poured from a heating vat. There is a light that turns on and stays on the operation console during the entire process. There is another light that turns on and remains on while the hot milk is being poured. It takes 5 seconds to fill the bottle to the appropriate level. Once the milk is poured, a fan will come on for 15 seconds to cool the mixture to the appropriate temperature before marshmallows are added. Another light will light up and remain on during the cooling process. Once the mixture is cooled to the appropriate temperature, marshmallows are added to the mixture. It takes 2 seconds for the appropriate number of marshmallows to be added to the bottles. A buzzer will sound while the marshmallows are being added to the mixture. This tells the operator that it is almost time to make sure the process has run 5 times, the process will end and everything will reset to 0 . A light will come on and remain on letting the operator know the process has run 5 times. It will remain on until either the power off button has been pressed or the start button is pressed to run the process again. If the power off button is pressed, a light will turn on only while the button is being pushed. This power off button will act as an Emergency Off button. If the button is pushed, the counter will not restart. It will continue when the start button is pressed again. NOTE: The bottles do not move, instead another dispenser moves toward the bottles. There is no need to add a wait time between the cooling process and adding the marshmallows or between the marshmallow addition and adding hot milk to the next set of bottles. We will not program the marshmallow part of the process. We will assume that has always been a process and we are