Addressing Table: Required Resources: 1 Cisco Catalyst Switch 2960. 1PC is connected to the switch (PC0 is connected to FastEthernet 0/1). 1PC is connected to the switch (PC1 is connected to the console port on the switch by console cable to configure the switch). Network Topology: (0.25 Mark) Ouestions: 1) Change the Switch0 name to be your first name. For example: Majed, Ali, Ahmed.... (0.25 Mark) Important Note: The first letter of your first name should be written in a capital letter. 2) Prevent the Switch0 from attempting to translate incorrectly entered commands, disable the Domain Name System (DNS) lookup. (0.25 Mark) 3) Enter a login MOTD banner to warn about unauthorized access to the switch. (0.25 Mark) Important Note: You can write any suitable message. 4) Configure and enable interface VLAN 100 includes (IP address 192.168.1.100 and subnet mask 255.255.255.0) on the Switch0. (0.75 Mark) 5) Configure passwords in each of Enable mode and Console cable access as your Student ID, to prevent unauthorized access to the Switch0. (1 Mark) Important Note: 1- Student ID at University of Jeddah. 6) Enter the IP address for PC0 (192.168.1.200 and subnet mask 255.255.255.0). (0.25 Mark) Activity Requirements: 1- Apply and Answer each of the above questions step by step through Cisco Packet Tracer