Assembly Programming

write assembly code segments by using loops and branch instructions to do the following

Note: For our microcontrollers, DIP switches are connected to PTH, and the LEDs are connected to PORTB.

Read the DIP switches. If DIP switches are set exactly equal to 0x18, then, send the readings to LEDs; otherwise, turn off all LEDs;

Read the DIP switches. If DIP switches are set such that b4 = b3 = 1, then, send the readings to LEDs; otherwise, turn off all LEDs;

Read the DIP switches. If DIP switches are set such that either b3 = 1 or b4 = 1, then, send the readings to LEDs; otherwise, turn off all LEDs;