Assume that we want to register all 2-digit info on LED display every 250ms such that...
Fantastic news! We've Found the answer you've been seeking!
Question:
Transcribed Image Text:
Assume that we want to register all 2-digit info on LED display every 250ms such that there will be no lost data during screening. Output stage of camera will feed transceiver unit. 88 • There is a LED screen and 2-digit codes are present on it • There is a 50x50 matrix pixel set is on the screen. When digits are on, other pixels on the LED are dark. In case where two digits numbers are illuminated only a 50% of all pixels for worst case are in use. • 2-digit code on the display changes every half seconds. Between two succeeding frames there is 10ms of NULL. A 10x10=100 pixel resolution camera is taking pictures of LED display simultaneously. It sub-stores images during 2,070 seconds. Note that, between each frame, there is 10ms of NULL. • By then, it feeds the transceiver unit by 2, 070 seconds length multi-frames. • A camera to be used supports up to 64bits in colour and brightness. • Expected SNR through the system is at least 30DB. o All other conditions are assumed as perfect and as it is expected. Ignore un-expected problems rather than declared above. Q1(50P) AM modulator and demodulator couples based on following rules will be used transfer to above 2-digit camera pictures from one location to another one. Design Principles: 1- bandwidth of filter you will design will be 12kHz in case of double sideband solutions. 2- carrier frequency will be 11MHZ. 3- Amplitude of message signal will be 34 (mV) 4- Amplitude of carrier signal will be 33 (mV) a) Design and determine the values of all elements in transceiver couple. All values must be proved by mathematical calculations. b) Check the possibility of your design either it will allow you to transfer a multi-frame. c) If not, please offer a method to transfer a useful data without missing any info. d) Discuss problems related to modulated index, if any. rofess UEE Q2(50P) A narrow band FM modulator and demodulator couples based on following rules will be used transfer to above 2-digit camera pictures. Design Principles: 1- bandwidth of message signal will be 6 kHz in case of double sideband solutions. 2- Means carrier frequency will be 40 MHz. 3- Allowable maximum frequency deviation of the system is 50kHz. 4 - B = 0.03 a) Design and determine the values of all elements in transceiver couple. All values must be proved by mathematical calculations. b) Check the possibility your design couple either it will allow you to transfer multi-frame. c) If not, please offer a method to transfer a useful data without missing any info. d) Discuss if you meet any contradiction between calculated modulation index and common design requirements. SUEE es: fes Assume that we want to register all 2-digit info on LED display every 250ms such that there will be no lost data during screening. Output stage of camera will feed transceiver unit. 88 • There is a LED screen and 2-digit codes are present on it • There is a 50x50 matrix pixel set is on the screen. When digits are on, other pixels on the LED are dark. In case where two digits numbers are illuminated only a 50% of all pixels for worst case are in use. • 2-digit code on the display changes every half seconds. Between two succeeding frames there is 10ms of NULL. A 10x10=100 pixel resolution camera is taking pictures of LED display simultaneously. It sub-stores images during 2,070 seconds. Note that, between each frame, there is 10ms of NULL. • By then, it feeds the transceiver unit by 2, 070 seconds length multi-frames. • A camera to be used supports up to 64bits in colour and brightness. • Expected SNR through the system is at least 30DB. o All other conditions are assumed as perfect and as it is expected. Ignore un-expected problems rather than declared above. Q1(50P) AM modulator and demodulator couples based on following rules will be used transfer to above 2-digit camera pictures from one location to another one. Design Principles: 1- bandwidth of filter you will design will be 12kHz in case of double sideband solutions. 2- carrier frequency will be 11MHZ. 3- Amplitude of message signal will be 34 (mV) 4- Amplitude of carrier signal will be 33 (mV) a) Design and determine the values of all elements in transceiver couple. All values must be proved by mathematical calculations. b) Check the possibility of your design either it will allow you to transfer a multi-frame. c) If not, please offer a method to transfer a useful data without missing any info. d) Discuss problems related to modulated index, if any. rofess UEE Q2(50P) A narrow band FM modulator and demodulator couples based on following rules will be used transfer to above 2-digit camera pictures. Design Principles: 1- bandwidth of message signal will be 6 kHz in case of double sideband solutions. 2- Means carrier frequency will be 40 MHz. 3- Allowable maximum frequency deviation of the system is 50kHz. 4 - B = 0.03 a) Design and determine the values of all elements in transceiver couple. All values must be proved by mathematical calculations. b) Check the possibility your design couple either it will allow you to transfer multi-frame. c) If not, please offer a method to transfer a useful data without missing any info. d) Discuss if you meet any contradiction between calculated modulation index and common design requirements. SUEE es: fes
Expert Answer:
Related Book For
Posted Date:
Students also viewed these accounting questions
-
Assume that we want to use the sample data from Exercise 1 to test the claim that the sample is from a population with a standard deviation less than 1.8 min; we will use a 0.05 significance level to...
-
Assume that we want to use the same sample data from Exercise 7 to test the claim that the standard deviation of all drawn numbers is less than 15.0. Why cant we use a x2 test with the methods...
-
Assume that we want to identify a simple random sample of 12 of the 372 doctors practicing in a particular city. The doctors names are available from a local medical organization. Use the eighth...
-
A coil with 190 turns, a radius of 5.0 cm, and a resistance of 12 Ω surrounds a solenoid with 230 turns / cm and a radius of 4.5 cm (Fig. 21-65). The current in the solenoid changes at a...
-
Propose a mechanism for the formation of 9-hydroxynonanoic acid lactone, as shown in the preceding figure.
-
In your own words, explain why the axioms that underlie expected utility are important to decision analysis.
-
Using the software development life cycle approach, do we apply project management principles to software development? Elaborate on your answer.
-
The financial statements for Tootsie Roll Industries appear in Appendix A at the end of this book. Instructions Answer these questions using the Consolidated Income Statement . (a) What was the...
-
The spot rate of interest is defined by st = 0.1 (0.8)t for t = 1, 2, 3, 4, 5. Find the present value of a 5-year annuity-due in which the first payment is equal to $1000, and each subsequent...
-
1 [6-d-1] On January 2, 2019, the Street Improvement Bond Debt Service Fund (DS) budget for 2019 was legally adopted. The budget provides for estimated property tax revenue of $900,000, of which...
-
The Cessna Aircraft Company has outstanding an issue of 4% convertible bonds that mature October 1, 2024. Suppose the bonds are dated October 1, 2016, and pay interest each April 1 and October 1. The...
-
Electric charge \(q\) and electric current \(i\) are related via \(i=d q / d t\). In Problem 15, find the transfer function if \(v(t)\) and \(q(t)\) are the system input and output, respectively.
-
The governing equation for an electric circuit is derived as \[L \frac{d i}{d t}+R i+\frac{1}{C} \int_{0}^{t} i(t) d t=v(t)\] where \(L, R\), and \(C\) are the inductance, resistance, and...
-
A system model and its inputs and outputs are provided. Find the appropriate transfer function or matrix. \(\left\{\begin{array}{l}\ddot{x}_{1}+x_{1}-x_{3}-2\left(\dot{x}_{2}-\dot{x}_{1}...
-
A system model and its inputs and outputs are provided. Find the appropriate transfer function or matrix. \(\left\{\begin{array}{l}\ddot{x}_{1}+x_{1}-\left(x_{2}-x_{1}...
-
A system model and its inputs and outputs are provided. Find the appropriate transfer function or matrix. \(\left\{\begin{array}{l}\ddot{q}_{1}+\dot{q}_{1}+\frac{1}{2}\left(q_{1}-q_{2}...
-
Canadian Pacific Railway (known as "CP"), with headquarters in Calgary, Alberta, owns approximately 20,100 kilometers of track in seven provinces of Canada and into the United States. Review CP's...
-
Linda Lopez opened a beauty studio, Lindas Salon, on January 2, 2011. The salon also sells beauty supplies. In January 2012, Lopez realized she had never filed any tax reports for her business and...
-
Alert nurses at the Veterans Affairs Medical Center in Northampton, Massachusetts, noticed an unusually high number of deaths at times when another nurse, Kristen Gilbert, was working. Those same...
-
Data Set 15 in Appendix B lists 48 different departure delay times (minutes) for American Airlines flights from New York (JFK) to Los Angeles. Negative departure delay times correspond to flights...
-
Refer to Data Set 22 in Appendix B for the axial loads of aluminum cans that are 0.0111 in. thick. The load of 504 lb is an outlier because it is very far away from all of the other values. Construct...
-
Input information from the SBA Personal Financial Statements given to Sharptop Bank into a spreadsheet. a. Separate personal items (e.g., residence) from business items (e.g., inventory). b....
-
Compare your recalculated ending inventory to that given to Sharptop Bank and to Southern Appalachian Insurance. Is either estimated ending inventory materially different from that reported on the...
-
What accuracy certifications on the tax return and bank financial statement address providing materially inaccurate information?
Study smarter with the SolutionInn App