CASE STUDY 1 INDUSTRIAL HAZARD ASSESSMENT difficulties always allow A plant worker in a textile manufacturing plant is experiencing some with a clamping device on a holding fixture that keeps a material in position while it is fed into an automatic stencilling machine. The clamp does not the material to be fed into the machine properly aligned with the stencil. The worker who was operating the machine had 32 years' experience with this type of equipment. While attempting to make the necessary adjustments for smooth operation without shutting off the power, she had to reach into the machine. She placed her left hand between the feed-in mechanism levers while her right hand was positioning the misaligned part between the open clamps of the fixture. Unfortunately, the one-button actuating control was located immediately to the left of the worker's body, about hip level. The worker inadvertently depressed the button with her leg while reaching into the machine. The machine cycled-the feed mechanism slid forward while the fixture clamps closed. The worker's sleeve was pinched in the clamps and her arm was pulled partly into the machine before a coworker was able to hit the emergency stop button. You have been asked to inves- tigate and as part of that investigation you have been asked to list the following: a. the unsafe acts b. the unsafe conditions c. the energies involved P-1 d. the steps to be taken to prevent this situation from recurring Details Rubrics Maximun Points Review and complete Case Study 1, page 112 in the Textbook. Ensure you read Chapter 4 before your complete this assignment CASE STUDY 1 INDUSTRIAL HAZARD ASSESSMENT plant worker in a textile manufacturing plant is experiencing some difficulties with a clamping device on a holding fixture that keeps a materialin position while it is fed into an automatic stencilling machine. The clamp does not always allow the material to be fed into the machine properly aligned with the stencil Tas worker who was operating the machine had 32 years experience with this PA of equipment. While attempting to make the necessary adjustments for smooth operation without shutting off the power, she had coach into the machine. She placed her left hand between the feed-in mechanism leven while her right hand was positioning the misaligned part between the open clamps of the fixture Unfortunately, the one-button actuating control wax locared immediately the left of the workers body, about hip level. The worker inadvertently depressed the button with her leg while reaching into the machine. The machin cycled the feed mechanism klid forward while the fixture clamps elored. The workers leeve wax pinched in the clamps and her arm was pulled partly into the machine hatore coworker was able to hit the emergency stop button. You have been asked to invest tigate and as part of that investigation you have been asked to list the lawing a the unsafe acts be the unsafe conditions c. the energies involved d. the steps to be taken to prevent this situation from teens Accurately described the following information Unsafe Acts Unsafe Conditions All Energies involved Provided the steps to be taken to prevent this situation from Hierarchy of Controls with description of specific controls (not the recurring: steps to include definition of the controls) as follows: Elimination Substititulon Engineering Administrative PPE References were provided using the APA format Limited spelling, punctuation, capitalization and grammar errors Grammar and Formatting The submitted assignment was easy to follow and easy to read i.e. consistency in formatting, provided headings, subheadings, table formats or other formats were used when appropriate) Points Percentage (Overall Mark) 3 3 3 2 2 2 2 2 2 2 2 25 2096