Draw the PLC ladder logic for each program

Tuesday (Afternoon and Evening) Assignmernt PLC Program #1: Push C40 as the "Start" button. l of six Extend and retract the cylinder controlled by solenoid valve Y3 (the cylinder with NC sensors) a tota times d by solenoid valve yo. At the sixth full extension of the cylinder controlled by Y3, extend the cylinder controlle Keep it retracted for a total of five seconds. After the cy configuration. linder controlled by YO returns to the home position, the system should be returned to the startup If a "S configuration. top" button is pressed at any time, retract all cylinders and return the system to the startup PLC Program #2: Use C40, and C41 as "selection" buttons and C50 as the "Go" button. If the user presses C40 and then CSo, Extend and retract the cylinder attached to YO a total of three times Simultaneously, extend the cylinder attached to Y1 and keep that cylinder extended for three seconds before retracting it. If the user presses C41 and then C50, tend the cylinder attached to YO and keep that cylinder extended for three seconds before retracting it. Simultaneously, extend and retract the cylinder attached to Y1 a total of three times. Ex For either sequence, pressing CA2 should immediately retract any extended cylinders and return the system to the startup configuration