Question: A spherical hot-air balloon is initially filled with air at 120 kPa and 20C with an initial diameter of 5 m. Air enters this

A spherical hot-air balloon is initially filled with air at 120 kPa

A spherical hot-air balloon is initially filled with air at 120 kPa and 20C with an initial diameter of 5 m. Air enters this balloon at 120 kPa and 20C with a velocity of 3 m/s through a 1-m diameter opening. How many minutes will it take to inflate this balloon to a 15-m diameter when the P and T of the air in the balloon remain the same as the air entering the balloon?

Step by Step Solution

★★★★★

3.50 Rating (150 Votes )

There are 3 Steps involved in it

1 Expert Approved Answer

Step: 1 Unlock blur-text-image

Question Has Been Solved by an Expert!

Get step-by-step solutions from verified subject matter experts

Step: 2 Unlock

Step: 3 Unlock

Students Have Also Explored These Related Chemical Engineering Questions!

A spherical hot-air balloon is initially filled with air at 120 kPa and 20°C with an initial diameter of 5 m. Air enters this balloon at 120 kPa and 20°C with a velocity of 3 m/s through a...

A 100-L well-insulated rigid tank is initially filled with nitrogen at 1000 kPa and 208C. Now a valve is opened and one-half of nitrogen's mass is allowed to escape. Determine the change in the...

A D0 = 10-m-diameter tank is initially filled with water 2 m above the center of a D = 10 cm-diameter valve near the bottom. The tank surface is open to the atmosphere, and the tank drains through a...

Efflux time for draining a conical tank (Fig. 7B.10), a conical tank, with dimensions given in the figure, is initially filled with a liquid. The liquid is allowed to drain out by gravity. Determine...

Consider a 300-L storage tank of a solar water heating system initially filled with warm water at 45°C. Warm water is withdrawn from the tank through a 2-cm diameter hose at an average velocity...

A hot air balloon with a volume of 12.0 m3 is initially filled with air at a pressure of 1.00 atm and a temperature of 19.0C. When the balloon air is heated, the volume and the pressure of the...

A 1.5-m-diameter, 4-m-long cylindrical propane tank is initially filled with liquid propane, whose density is 581 kg/m 3 . The tank is exposed to the ambient air at 25°C in calm weather. The...

The boiling temperature of nitrogen at atmospheric pressure at sea level (1 atm pressure) is 196 C. Therefore, nitrogen is commonly used in low-temperature scientific studies since the temperature...

White potatoes (k = 0.50 W/m·K and a = 0.13 Ã 10 -6 m 2 /s) that are initially at a uniform temperature of 25°C and have an average diameter of 6 cm are to be cooled by refrigerated...

Figure Q1 shows a beam ABC that is roller and pin supported at A and B, respectively. The beam carries a uniformly distributed load, moments at A and a trapezoidal load (a) Calculate the reactions at...

Need full calculation with diagrams solution full accurate clean handwriting. GENERAL DIRECTIONS: Solve the given problems below. Writeyour answer on the space provided and box your final answer. Use...

2. An acclaimed restaurant, Fleur De Lys is interested in knowing if their diners spend more on weekends than weekdays. To determine this, random samples of 36 weekend diners and 36 weekday diners...

Imagine a company that is trying to fill a manager position based on the behavioral approach of leadership. Would they focus more on selection or development?

R is required for this question. Can someone walk me through the steps? Open the prostate data from the faraway package. Model lpsa as the response and all other variables as predictors. Implement...

In the "Implications for public health" the researchers suggest various steps that could be taken to prevent bystanders from drowning when attempting a rescue. (They use the term bystander even when...

Analysis of the Financial Health of this bank through Ratio analysis, Trend analysis, and Common Size Analysis Recommendation based on the outcome of the analysis ( WORD LI MITE 8000) 5-year...

If the cylinder described in Problem 21.3 were initially heated to 500F, how long would it take for the center of the cylinder to cool to 240F if it were constructed of a. Copper? b. Brass? c. Nickel?

A 0.18-m3 rigid tank is filled with saturated liquid water at 120C. A valve at the bottom of the tank is now opened, and one-half of the total mass is withdrawn from the tank in the liquid form. Heat...

Water is boiled at sea level in a coffee maker equipped with an immersion-type electric heating element. The coffee maker contains 1 L of water when full. Once boiling starts, it is observed that...

Saturated water vapor at 350oC is heated at constant pressure until its volume has doubled. Determine the final temperature using the ideal gas equation of state, the compressibility charts, and the...

The Allowance for Doubtful Accounts and the Market Adjustment account are both balance sheet accounts. Identify the asset accounts they are related to. Explain how both accounts are increased and...

Ruelman Corporation currently manufactures 3,000 units of component XYZ annually for its main product. The costs per stapler are as follows: Direct materials ............................................

During 2012, Blaine Company sold a building with a book value of $145,000 for proceeds of $175,000. The company also sold long-term investments for proceeds of $32,000. The company purchased land and...