Question: Exercise 4.1: CSTR Design Using Damkhler Number (Da) The elementary reversible reaction A+B2C occurs in the liquid phase in an isothermal CSTR. A stream containing
Exercise 4.1: CSTR Design Using Damkhler Number (Da) The elementary reversible reaction A+B2C occurs in the liquid phase in an isothermal CSTR. A stream containing the equimolar amount of A and B in a solvent enters the reactor, and the conversion of A is measured to be 60%. The equilibrium conversion of A under the same inlet conditions is known to be 80%. The volumetric flow rate into the process is to be increased by a factor of 1.5, with the inlet concentrations of A and B and the temperature remaining constant. What is the new conversion of A ? Exercise 4.2: PFR Design Using Damkhler Number The elementary irreversible reaction A+B C is conducted in the gas-phase in an isothermal PFR. The feed enters the reactor at a pressure of 10 bar and temperature of 600K, and consists of 30%A,30%B, and 40% inert. The conversion of A in exiting PFR is measured to be 50%. By what factor should the PFR volume used for this process be increased to achieve a conversion of 75% if there is no change in the feed stream? Exercise 4.3 Effect of Stoichiometry in Gas-Phase Reaction An elementary reversible gas-phase reaction 2A+BC is being conducted in an isothermal PFR. The conversion of the limiting reactant is 75%. The process temperature and pressure are 500K and 8atm, respectively, and the feed consist of 40% A and 60% B. What is the outlet concentration of A? Assume ideal gas conditions
Step by Step Solution
There are 3 Steps involved in it
Get step-by-step solutions from verified subject matter experts
