Help !!!

6. Use the Digilent Analog Discovery Static I/O tool to provide the ABCD inputs and Youtput and complete the table below. (If you are unfamiliar with the Digilent go to the bottom of this lab for guidance.) 5 pts From Engineering Programs on the desktop open the Waveforms program Open the Static I/O window. Arrange DO-D3 to be inputs. Right click and select push-pull switches. Turn on the DMM and use that to measure the 4 input voltages as you toggle them from 1 to 0. D4 will be used as your output and it is already set for an LED. Change the switches to match your table settings and record the output state in the table. 15 on 0=off. If your circuit is not working see below for troubleshooting. decimal D C B A Equation Reduced Digilent D3 D2 D1 DO as Given Equation test of hardware 0 OOOO 1 0001 2 0 0 1 0 3 0101 4 1000 5 0011 6 1.100 7 0 1 1 1 8 1000 0 1001 10 1010 11 1 0 1 1 12 1100 13 1101 14 1 1 1 0 15 The last three columns should be equal when done correctly. OOOOO 6. Use the Digilent Analog Discovery Static I/O tool to provide the ABCD inputs and Youtput and complete the table below. (If you are unfamiliar with the Digilent go to the bottom of this lab for guidance.) 5 pts From Engineering Programs on the desktop open the Waveforms program Open the Static I/O window. Arrange DO-D3 to be inputs. Right click and select push-pull switches. Turn on the DMM and use that to measure the 4 input voltages as you toggle them from 1 to 0. D4 will be used as your output and it is already set for an LED. Change the switches to match your table settings and record the output state in the table. 15 on 0=off. If your circuit is not working see below for troubleshooting. decimal D C B A Equation Reduced Digilent D3 D2 D1 DO as Given Equation test of hardware 0 OOOO 1 0001 2 0 0 1 0 3 0101 4 1000 5 0011 6 1.100 7 0 1 1 1 8 1000 0 1001 10 1010 11 1 0 1 1 12 1100 13 1101 14 1 1 1 0 15 The last three columns should be equal when done correctly. OOOOO