help please

5. (Chapter 3.3) Using a table similar to that shown in Figure 3.6, calculate the product of the octal unsigned 6-bit integer 71 and 25 using the hardware described in Figure 3.3. You should show the contents of each register on each step. (8 points) 6. (Chapter 3.5) Write down the binary representation of the decimal number -35.6125 assuming the IEEE 754 single precision format. (4 points) 7 (Chapter 3.5) IEEE 754-2008 contains a half precision that is only 16 bits wide. The leftmost bit is still the sign bit, the exponent is 5 bits wide and has a bias of 15, and the mantissa is 10 bits long. A hidden 1 is assumed. Write down the bit pattern to represent-1.5625 * 10% assuming a version of this format. Calculate the sum of 2.6125*10' and 4.150390625 * 10 by hand, assuming both numbers are stored in the 16-bit half precision described above. Assume l guard, 1 round bit, and 1 sticky bit, and round to the nearest even. Show all the steps. (8 points) 5. (Chapter 3.3) Using a table similar to that shown in Figure 3.6, calculate the product of the octal unsigned 6-bit integer 71 and 25 using the hardware described in Figure 3.3. You should show the contents of each register on each step. (8 points) 6. (Chapter 3.5) Write down the binary representation of the decimal number -35.6125 assuming the IEEE 754 single precision format. (4 points) 7 (Chapter 3.5) IEEE 754-2008 contains a half precision that is only 16 bits wide. The leftmost bit is still the sign bit, the exponent is 5 bits wide and has a bias of 15, and the mantissa is 10 bits long. A hidden 1 is assumed. Write down the bit pattern to represent-1.5625 * 10% assuming a version of this format. Calculate the sum of 2.6125*10' and 4.150390625 * 10 by hand, assuming both numbers are stored in the 16-bit half precision described above. Assume l guard, 1 round bit, and 1 sticky bit, and round to the nearest even. Show all the steps. (8 points)