I need solution with calculations as well

Current Attempt in Progress Building a kayak using the composite method is a very labour-intensive process. In the fabrication department, the kayaks go through several steps as employees carefully place layers of Kevlar in a mould and then use resin to fuse together the layers. The excess resin is removed with a vacuum process, and the upper shell and lower shell are removed from the moulds and assembled. The seat, hatch, and other components are added in the finishing department. At the beginning of April, Current Designs had 31 kayaks in process in the fabrication department Rick Thruase, the production manager, estimated that about 8096 of the material costs had been added to these boats, which were about 5016 complete with respect. to the conversion costs. The cost of this inventory had been calculated to be $9,150 in materials and $8.360 in conversion costs. During April, 69 boats were started into production. At the end of the month, the 35 kavaks in the ending inventary were 20x complete as to materiats and 405 complete as to conversion costa. A review of the accounting records for Aprit showed that nateriats with a cast of $15:390 had been requisitioned by this department and that the coinversion costs for the month were $41,410 and comersion costs are incurred unifortnly thitoushout the procest Quantities Units to be accounted for Conversion Cos Work in process inventory. April 1 Started into production Totalunits to be accounted for Unitszccounted for Completed and transferred out Workin process inventory April30 Costs to be accounted tor Workin process inventory. Aprit 1 Startedinto production 2 poth.2.ppte Question 7 of 7