let me be clear I expect a full, correct, explained and typed answer to parts A and B of Q1

Question 1: Calibration \& instrument characteristics A new device is being developed for measurement of plasma glucose concentration intended to cover the range 50200mg/dL. A prototype for the device has been completed, with an output display indicating the estimated concentration level, denoted " C.." To calibrate the device, the true concentration, denoted " T ", is manipulated experimentally and the indicated values are recorded. A. In a first experiment, the true concentration is set to a fixed value of 105mg/dL and ten repeated measurements of the indicated concentration are recorded: Cl={105.79,103.72,100.93,101.05,116.60,98.17,102.93,97.15,106.06,105.59} i. Compute the device's bias error and precision error. ii. If it is determined that the bias and precision error computed above are of a fixed magnitude across the device's operating range, then given an indicated value of 116 mg/dL, what would be its 95% confidence interval? B. In another similar device, it is found that there is a bias error that varies over the input range and that differs depending on whether the input is ascending versus descending. It is determined that the best fitting polynomial of the input-output curve (i.e., Cvs.CT ) is given by Cla=0.002CT2+0.5CT+35 mg/dL when the true concentration is ascending, and Cld=0.002CT2+1.5CT5mg/dL when the true concentration is descending. Compute the % hysteresis of the device