Need help with this Cisco Packet Tracer commands solution

Configure the network as shown. USE OSPF as your routing protocol. Use DHCP to provide dynamic addressing to the PCs Switchports 1-10 should be assigned to VLANS 10 and 30. Switchports 11-20 should be assigned to VLANs 20 and 40. Create and implement a dynamic Network Address Translation with Overload (PAT) scheme to allow for private IP addressing for VLANs 30 and 40. Use 10.0.30.0/24 and 10.0.40.0/24 for your private addressing. In addition, you need to create Access Control to allow VLAN10 and VLAN30 to communicate with each other, but they may NOT access VLAN20 or VLAN40. AND You need to create Access Control to allow VLAN20 and VLAN40 to communicate with each other, but they may NOT access VLAN10 or VLAN30. Configure the network as shown. USE OSPF as your routing protocol. Use DHCP to provide dynamic addressing to the PCs Switchports 1-10 should be assigned to VLANS 10 and 30. Switchports 11-20 should be assigned to VLANs 20 and 40. Create and implement a dynamic Network Address Translation with Overload (PAT) scheme to allow for private IP addressing for VLANs 30 and 40. Use 10.0.30.0/24 and 10.0.40.0/24 for your private addressing. In addition, you need to create Access Control to allow VLAN10 and VLAN30 to communicate with each other, but they may NOT access VLAN20 or VLAN40. AND You need to create Access Control to allow VLAN20 and VLAN40 to communicate with each other, but they may NOT access VLAN10 or VLAN30