PART $2-$ Subnet the network using VLSM$,$ and assign IP addresses to the appropriate devices. Each location has the following number of hosts Melbourne, Ontario, and Vancouver each include a wireless LAN for clients to use. Location, Workstations, WLAN addresses Perth $,1100,48$ Glasgow $,90,10$ Zurich $,450,115$ Auckland $,100$ Denver, $125$ Subnetting Use VLSM to subnet the network topology using a public class B network. You are to use the tableformat below to provide the subnet details. Table $1.$ Subnets $($including WAN subnets$)$ Spreadsheet Columns: Subnet name, subnet address, subnet mask $($in slash format ONLY$),$first useable address, last useable address, broadcast address, static address range and DHCPaddress range $($all addresses to be in dotted decimal notation$)$ Table $2.$ Router Interfaces Spreadsheet Columns: Location, interface, IP address, subnet mask $($in slash format ONLY$)$ Table $3.$ Servers Spreadsheet Columns: Location, server name, IP address, subnet mask $($in slash format ONLY$)$ Additional requirements: Choose one public B class network address for the entire network and subnet this block ofaddresses to optimise spare addresses for future expansion. Place the WAN subnets in the blocks directly following the LAN$/$WLAN address space $($i$.$e$.,$finish putting all the LAN$/$WLAN subnets in the table first, then follows by the WAN subnets$).$ ADD $100$ can you use public b class$=129\mathrm{.}17\mathrm{.}0\mathrm{.}0/16$