Process Activity Analysis The Brite Beverage Company bottles soft drinks into aluminum cans. The manufacturing process consists of three activities: 1. Mixing: water, sugar, and beverage concentrate are mixed. 2. Filling: mixed beverage is filled into 12-ozcans. 3. Packaging properly filled cans are boxed into cardboard "fridge packs". The activity costs associated with these activities for the period are as follows: Moding Filling $216,000 168,000 96,000 Packaging Total $480,000 The activity costs do not include materials costs, which are ignored for this analysis. Each can is expected to contain 12 ounces of beverage. Thus, after being filled, each can is automatically weighed. If a can is too light, it is rejected, or "kicked", from the filing line prior to being packaged. The primary cause of kicks is heat expansion With heat expansion, the beverage overflows during filing, resulting in underweight cans. This process begins by micing and filling 6,300,000 cans Ouring the period, of which only 6,000,000 cans are actually packaged. Three hundred thousand cans are rejected due to underweight kicks. A process improvement team has determined that cooling the cans prior to filling them will reduce the amount of overflows due to expansion. After this improvement, the number of kids is expected to decline from 300,000 cans to 63,000 cans, thus increasing the number of filed cans to 6,237,000 (6,000,000 + (300,000 - 63,000)]. a. Determine the total activity cost per packaged can under present operations. Round to the nearest cent. $ 0.06 X per can b. Determine the amount of increased packaging activity costs from the expected improvements. c. Determine the expected total activity cost per packaged can after improvements Round to three decimal places per can Check My Work Previous