Router0 Configuration Command :......... Continue with configuration dialog? [yeso]: no Press RETURN to get started! Router> Router>Enable Router#config t Enter configuration commands, one per line. End with CNTL/Z. Router(config)#hostname router0 router0(config)#interface fastethernet 0/0 router0(config-if)#ip address 192.168.1.1 255.255.255.0 router0(config-if)#description router0 fastethernet 0/0 router0(config-if)#no shutdown %LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up router0(config-if)#exit router0(config)#interface fastethernet 0/1 router0(config-if)#description router0 fastethernet 0/1 router0(config-if)#no shutdown %LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up router0(config-if)#exit router0(config)#exit %SYS-5-CONFIG_I: Configured from console by console router0#show running-config Building configuration... Current configuration : 437 bytes ! version 12.4 no service password-encryption ! hostname router0 ! ! ! ! ! ip ssh version 1 ! ! interface FastEthernet0/0 description router0 fastethernet 0/0 ip address 192.168.1.1 255.255.255.0 duplex auto speed auto ! interface FastEthernet0/1 description router0 fastethernet 0/1 no ip address duplex auto speed auto ! interface Vlan1 no ip address shutdown ! ip classless ! ! ! ! ! line con 0 line vty 0 4 login ! ! end router0# router0# router0#copy running-config startup-config Destination filename [startup-config]? Building configuration... [OK] router0#

EXPERIMENT-4 Aim: Configure a Network topology using packet tracer software. Apparatus (Software): Packet tracer Software Procedure: To implement this practical following network topology is required to be configured using the commands learned in previous practical. After configuring the given network a packet should be ping from any one machine to another. 181 1841 Router2 1841 Royeri Rougero 285024 switche 2450 24 switch PC-PT PCO PC-PT PC1 PC-PT PC2 PC-PT PC3 g