S MySeneca homepage X 8 F 38 E Priva Tern X Content learn.senecacollege.ca/ultra/courses/_664675_1/cl/outline Remaining Time: 2 hours, 28 minutes, 24 seconds. * Question Completion Status: 2. X 5. 1. Both switches connect with a cross-over cable, and the interface on one switch set on Trunk and the other switch has default settings, so the other switch interface mode will be changed to automatically. is a method to support passing traffics between multiple VLANs using a single physical router interface. ACL is supposed to be closer to the source. 3. 4. By default, switch interfaces are set to the Options Table: Bandwidth PAT NAT [Solved] explain details of how O. X 6. In neighbor requirements for OSPF, 7. In switchport modes, 8. In the spanning tree protocol (STP), we can use 9. In OSPF, the priority number 10. With Router-on-a-stick Shrink Broadcast Domain Traceroute Ping Network RouterID 0 is one of the VLAN benefits. G Chose the right answer from the X + Access Trunk Transport 1 Extended portfast Data Link , multiple private IP addresses can be translated into a single public IP address. Designated Router Wildcard Subnet mode. must be unique. begins negotiation message to dynamically to start using trunking. to make the interface change from the block to forward status very fast. means the router cannot become the DR or BDR. standard Flow Control Token Passing Dynamic Auto Dynamic Desirable la Token Passing Time-out Loopback Unspecified Supernet S X S MySeneca homepage X 8 F 38 N E Priva Tern X Content learn.senecacollege.ca/ultra/courses/_664675_1/cl/outline Remaining Time: 2 hours, 28 minutes, 35 seconds. X 2. * Question Completion Status: Chose the right answer from the options table. Note: The items MUST be entered as an exact match to those in the options table with no typos! 5. [Solved] explain details of how O. X G Chose the right answer from the X 1. Both switches connect with a cross-over cable, and the interface on one switch set on Trunk and the other switch has default settings, so the other switch interface mode will be changed to automatically. is a method to support passing traffics between multiple VLANs using a single physical router interface. ACL is supposed to be closer to the source. 3. 4. By default, switch interfaces are set to the Options Table: Bandwidth PAT NAT Router-on-a-stick Shrink Broadcast Domain Traceroute Ping Network RoutorID 6. In neighbor requirements for OSPF, 7. In switchport modes, 8. In the spanning tree protocol (STP), we can use 9. In OSPF, the priority number 10. With is one of the VLAN benefits. Access Trunk Transport 1 Extended must be unique. begins negotiation message to dynamically to start using trunking. to make the interface change from the block to forward status very fast. means the router cannot become the DR or BDR. multiple private IP addresses can be translated into a single public IP address. portfast Data Link Designated Router Wildoard standard Flow Control Token Passing Dynamic Auto Dynamic Desirable + Token Passing Time-out mode. Loopback Incponified la S X