Solve letter F using Enhance Bob Maneuver Method.

here is the step by step example of enhance bob maneuver method:

there is a problem in letter h

here are the answers in letter f.

Subnet 1 = 255.0.0.0/21255.224.0.0

Host range = 255.0.0.1 -

255.31.255.254

Broadcast ID = 255.31.255.255

Subnet 2 =

255.32.0.0/21255.224.0.0

Host range = 255.32.0.1 -

255.63.255.254

Broadcast ID = 255.63.255.255

Subnet 3 =

255.64.0.0/21255.224.0.0

Host range = 255.64.0.1 -

255.95.255.254

Broadcast ID = 255.95.255.255

Subnet 4 =

255.96.0.0/21255.224.0.0

Host range = 255.96.0.0 -

255.127.255.254

Broadcast ID =

255.127.255.255

Subnet 5 =

255.128.0.0/21255.224.0.0

Host range = 255.128.0.1 -

255.159.255.254

Subnet 5 Broadcast ID

= 255.159.255.255

Transcribed Image Text:

The Enhanced Bob Maneuver 192 224 240 248 252 254 255 128 64 8 7 126 32 16 6 5 62 30 Step 3. The dark lines reverse direction. Step 4. Go to the of spaces 0 16 32 48 64 80 96 112 128 144 160 176 192 208 8 4 14 Module 1 +3k6 4 2 NN 224 240 256 Stop - too far! Step 1. On the bottom line (Number of Valid Subnets), move from right to left and find the closest number that is bigger than or equal to what you need: Nine subnets-move to 14 2 Step 2. From that number (14), move up to the line called Bit Place. Above 14 is bit place 2 1 1 N/A Subnet Mask Target Number Bit Place Number of Valid Subnets Step 5. This target number is what you need to count by, starting at 0 and going until you hit 255 or greater. Stop before you get to 256: called the high-order line. If you cross the line, you have to called Target Number. Counting from the left, move over the number t the bit place number tell you. 19 Lesson 4: Enhanced Bob Maneuver for Subnetting The Enhanced Bob Maneuver 192 224 240 248 252 254 255 128 64 8 7 126 32 16 6 5 62 30 Step 3. The dark lines reverse direction. Step 4. Go to the of spaces 0 16 32 48 64 80 96 112 128 144 160 176 192 208 8 4 14 Module 1 +3k6 4 2 NN 224 240 256 Stop - too far! Step 1. On the bottom line (Number of Valid Subnets), move from right to left and find the closest number that is bigger than or equal to what you need: Nine subnets-move to 14 2 Step 2. From that number (14), move up to the line called Bit Place. Above 14 is bit place 2 1 1 N/A Subnet Mask Target Number Bit Place Number of Valid Subnets Step 5. This target number is what you need to count by, starting at 0 and going until you hit 255 or greater. Stop before you get to 256: called the high-order line. If you cross the line, you have to called Target Number. Counting from the left, move over the number t the bit place number tell you. 19 Lesson 4: Enhanced Bob Maneuver for Subnetting