this is the whole question

this is whole question

Show the complete goal, scope definition and life cycle inventory for the study conducted in the following scenario: A plastics manufacturing process in California involves two stages. Stage 1 takes 100 kg of Resin A and is operated with electricity, consuming 300 kWh. There is a resulting solid waste of 15 kg from this stage. The product from this stage enters the second and final stage, where 1 kg of Resin B is added for every 10 kg of product from the first stage. This process is operated with diesel, consuming 0.1 gallon for every kg of the combined raw material. The manufacturer is required to prepare for the California Air Resources Board an environmental effect declaration for the final product using an LCA study. For emission factors refer to the following tables: Electricity Emission Factors: State CO, Ib/kWh | CH, Ib./kWh | NO Ib./kWh California 0.61 0.0000067 0.0000037 New York 0.86 0.0000081 0.0000089 Petroleum Fuels Emission Factors: Fuel CO, lb./gal CO, lb./MMBtu Gasoline 19.37 154.91 Diesel 22.23 160.30 1. Goal & Scope Definition 1. Goals of the study: 2. Options to model: Processes 3. Flow Chart (Initial + Flow Model + System Boundary) 4. System Boundary: see flow diagram 5. Functional Unit: 6. Type of LCA: 7. Methodological Issues 8. Data Quality Requirements: II. Inventory Analysis 1. Flow Model: see Flow chart 2. Environmental Inputs & Outputs Resources: Intermediate product: Final product: Solid Waste: Emissions: 3. Calculation of the amount of resources used and pollutant emission of the system in relation to the Functional Unit. Show Calculations & Units of Measure Activity Data Data Normalized to Data Normalized to Collected Activity Unit (System) Functional Unit Stage 1 Inflows Outflows Stage 2 Inflows Ourflows III. Impact Assessment: Impact Categories