This Program is running on MARS MIPS

C (posted 10/11/2018, DUE 10/18/2018) The following tasks, in order: Allocate a global array e., space in the data segment) enough for storing 4 integers and initialize the array with , 222, 333 and 444 at the same time (ie.. DONT first allocate uninitialized space for array and later write code to put the values into array). Display a labeled output about the array's initial contents (from 1st to 4th element). Re-order the values in the array so that the contents of the array in memory (from st to 4th element) become 333, 444, 111 and 222, using the following operations in the order listed (to not defeat the goals of this exercise, you must NOT change the specified operations and order, even if doing so will accomplish the same effect more efficiently): wap the contents in memory of the 1st and 3rd elements of the array Swap the contents in memory of the 2nd and 4th elements of the array IMPORTANT (for the purpose of this exercise): When performing each of the swapping operations above, you can re-use the array's base address in register (loaded when performing an earlier operation) but you MUST re-load the values of the associated array elements fresh from memory (.e., assuming no knowledge that certain values might have already existed in some registers due to prior operations). Display a labeled output about the array's contents (from 4thto 1st element) after the 2 swapping operations above. NOTE: It is from 4th to lst element and not from Ist to 4th element. IMPORTANT (for the purpose of this exercise): When displaying the after-swap label output, you can re-use the array's base address in register (loaded when performing prior operations) but you MUSTreload the values of the array elements fresh from memory (i.e, assuming no knowledge that certain values might have already existed in some registers due to prior operations). CAUTION Too many past students regretted having points taken off for not labeling output