use any word documents

Read Material on "Accident Causation (Risky Workplace and Risky Workers) Accident Investigation" on BOSH Manual Page 117.. Use ppt materials as reference. Investigate the two Case Studies at the end part of ppt "Accident Investigation" and submit answers in google classroom. Case Studies: Accident Investigation 8 Key Facts in Accident Investigation: 1. nature of injury 2. part of the body 3. source of injury 4. accident type 5. hazardous condition 6. agency of the accident 7. agency of the accident part 8. unsafe act committed Case #1 The Accident: Driver J. Cruz and J. Reyes were unloading bulk feed from their truck into the feed bin of house #5. The truck's feed compartment was on a dumping tilted position. The truck was directly under the electrical high-tension wires, with 1.2kva, supplying power to the poultry houses. While unloading, J. Cruz noticed the feed was not flowing smoothly inside the compartment. He climbed above and looked into the manhole. When he raised his hand, he momentarily forgotten the electric wire above him. His nape got in contact with the wire and shock threw him into the manhole. Helper J. Reyes, who was standing at the tail of the truck was also thrown against the compartment. Safety Organization of the Philippines, Inc. Continuation of accident case #1 J. Cruz suffered burns on the nape and buttocks. While J. Roxas suffered cut on the forehead. The high tension wire diagonally crossed the road fronting house #5. Because of the terrain and the sag, the wires has a clearance of 18 feet from the ground level at the point in front of house #5 or where the truck was parked. The truck has a clearance height of about 12 feet, untitled, from the ground. If the bulk feed inside the truck compartment gets stucked, the driver dislodge by means of using poles through the manhole. According to Mr. Rodriguez, Farm Superintendent, this is the second time incident of this nature happened on the same spot Safety Organization of the Philippines, Inc. Case #2 The Accident: In a ship repair company, a welder was working on the side of a barge. The platform on which he was standing was almost touching the water. The platform was supported by rope on each end. While he was operating the electric welding machine, a motorboat passed by creating waves that caused the welder to off-balanced. He held on to the electric cable of the welding machine, still, fell into the water and got drowned. His body was recovered only the following day. Investigation revealed that the victim was an assistant to the regular welder, who was absent. When asked for written procedure, the company could not present one. 53 Safety Organization of the Philippines, Inc. WORKSHOP: ACCIDENT INVESTIGATION & REPORTING Format: Besonpuon on the accidenaste information, WHO, WHEN, WHERE, WHAT, HOW) @ Accident analysis; causation - root causes 3 RECOMMENDED ACTIONS, BY WHO, BY WHEN) Safety Organization of the Philippines, Inc