use Matlab and show all work

Problem 3. Create a single m-file for this problem. Separate each part using the cell mode (). It is not difficult to find an example that one engineering field uses a different unit system from one that another engineering field uses. The rate of energy input to a steam power plant from burning fossil fuels is usually measured in Btu/hour. However, the electricity produced by the same plant is usually measured in joules/second (watts). Automobile engines, by contrast, are often rated in horsepower. Convers factors are as follows: 1kW=3412.14Btu/hand1hp=2544.5Btu/h (a) Generate a table of conversion from kW to hp. The table should start at 0kW and end at 15kW. Use the input function to let the user define the number of entries in the table. (hint: use linspace) Use disp and fprintf to create a table with a title, column headings, and appropriate spacing. (b) Repeat part (a) using the table function. (c) Generate a table of conversion from hp to kW and Btu/h. Let the user define the initial value of hp, the increment between entries, and the number of entries in the table. Use disp and fprintf to create a table with a title, column headings, and appropriate spacing. (d) Repeat part (c) using the table function